Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3L RDIMM modules with gold contacts and black chips

OWC

OWC 1R6T31R4032S 32GB (4x8GB) DDR3L 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-F4DQ-5N79D

32 GB DDR3L 1600 ECC registered RDIMM kit (4 × 8 GB) for Supermicro SuperServer 4047R, 4048B, 5017GR, 5017R and 5027R systems

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 timing matches Supermicro specifications
  • 35 V operation lowers power draw for dense configs
  • 32 GB kit (4 × 8 GB) fills four 240-pin slots
  • Validated replacement for Supermicro MEMDR3 part numbers

OWC DDR3L ECC RDIMM kit

This OWC kit provides 32GB of DDR3L 1600 memory across four 8GB registered DIMMs. It is built for Supermicro SuperServer 4047R, 4048B, 5017GR, 5017R and 5027R systems that require ECC registered modules. The 1Rx4 organisation and CL11 timing match the original Supermicro part numbers. Desktop or unbuffered platforms cannot use this memory.

Low voltage registered operation

Each module runs at 1.35V, reducing power draw compared to standard DDR3 in always-on server roles. The registered buffer lightens electrical load on the memory controller, helping stability in multi-DIMM configurations. No heat spreader is fitted, so airflow through the chassis handles the modest thermal output. Acoustic impact is negligible in typical rack environments.

Sustained load behaviour

Under continuous workloads the registered design maintains signal integrity across all four slots without timing degradation. ECC correction operates transparently during extended compute or storage tasks. The kit replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 modules. It is not suitable for systems that only accept unbuffered DIMMs.

Pluspunten

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 timing matches Supermicro specifications
  • 35 V operation lowers power draw for dense configs
  • 32 GB kit (4 × 8 GB) fills four 240-pin slots
  • Validated replacement for Supermicro MEMDR3 part numbers

Specificaties

BrandOWC
Part Number1R6T31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 4047R Series
Supermicro SuperServer 4048B Series
Supermicro SuperServer 5017GR Series
Supermicro SuperServer 5017R Series
Supermicro SuperServer 5027R Series

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 240-pin DDR3L RDIMMs in a Supermicro SuperServer 4047R, and what step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips lock, then verify in BIOS that all 32GB are detected at 1600 MHz; the step often missed is seating all four modules before the first boot so the memory controller trains the full quad-channel array.

What maintenance or replacement will the 1.35 V ECC registered kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreaders or moving parts, so only a failed DIMM would need replacement, and ECC error logs will flag a bad rank long before data loss occurs.

What limit appears first when the four 8 GB 1Rx4 modules run sustained workloads in a 5027R?

The memory controller's maximum supported frequency of 1600 MHz is the first ceiling; the kit already operates at that JEDEC-rated speed, so sustained loads cannot push it higher without exceeding specification.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.