Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Three green DDR2 DIMM modules with gold contacts and silver heatspreaders

Simmtec, Inc

Simmtec, Inc MemoryMasters 6GB (3 x 2GB) DDR2 DIMM 240 PIN 667MHz PC2 5400/5300 for Biostar TF8200 A2+

SKU CH-W36D-NX626

A 6 GB DDR2 kit of three 2 GB DIMMs running at 667 MHz and rated PC2 5400 or PC2 5300 for the Biostar TF8200 A2+ motherboard

  • Capacity6GB (3 x 2GB)
  • 100% compatible with Biostar TF8200 A2+ motherboard
  • 6 GB total capacity in three 2 GB modules
  • DDR2 667 MHz PC2-5400/5300 speed rating
  • 240-pin DIMM form factor fits standard desktop slots

Simmtec MemoryMasters DDR2 kit for Biostar TF8200

This 6GB kit contains three 2GB DDR2 DIMMs built to run at 667MHz on the PC2 5400 and PC2 5300 standards. The 240-pin modules are verified for 100 percent compatibility with the Biostar TForce TF8200 A2+ motherboard. It suits owners of that specific board who need to populate three slots with matching capacity.

Thermals, noise and power draw in normal use

DDR2 memory operates without active cooling and produces no audible noise during typical desktop workloads. Power consumption stays low because the modules draw only the current required for standard JEDEC voltage operation. Heat output is minimal and handled passively by the motherboard airflow. Builders seeking RGB lighting or high-frequency overclocking headroom should look elsewhere.

Pluspunten

  • 100% compatible with Biostar TF8200 A2+ motherboard
  • 6 GB total capacity in three 2 GB modules
  • DDR2 667 MHz PC2-5400/5300 speed rating
  • 240-pin DIMM form factor fits standard desktop slots

Specificaties

Capacity6GB (3 x 2GB)

Vragen over dit artikel

How do I install the 240‑pin DDR2 DIMMs in the Biostar TF8200 A2+ and what step is often missed?

Align each module's notch with the slot key, press straight down until both side clips click, then verify the 667 MHz speed is detected in BIOS — the step most people miss is seating all three sticks before powering on.

What maintenance or replacement will the 6GB DDR2 kit need later?

DDR2 memory has no moving parts; keep the slots dust‑free with compressed air and reseat the modules if the system fails to POST — no scheduled replacement is required.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.