Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board adapter with SATA and USB connectors

SMUGDESK

SMUGDESK 1.8" mSATA to SATA Adapter Card with USB 2.0 Cable

SKU CH-W4HC-DCXP1

Converts a 1.8" mSATA SSD to standard SATA with included USB 2.0 cable for external access

  • Connect 1.8 mSATA SSD to standard SATA via 7+15Pin adapter
  • Use included SATA to USB 2.0 cable for external drive access
  • Hot-plug support enables plug-and-play data transfer without driver installs
  • Reliable signal chip ensures stable backup cloning and file recovery
  • Compact board design saves space for portable home office use

1.8" mSATA to SATA Adapter

This adapter converts a 1.8-inch mSATA solid state drive into a standard SATA device using a 7+15 pin interface. A matched SATA to USB 2.0 cable is included for direct external connection to a computer without internal installation. The board uses a control chip for stable signal transmission and supports hot-plug operation. It works with Windows, Mac OS and Linux systems without extra drivers.

Upgrades from internal mSATA slot

The converter lets you access data from an older 1.8-inch mSATA SSD when the original laptop or device no longer functions or lacks a compatible slot. It replaces the need for a working mSATA motherboard header by providing both internal SATA and external USB pathways. The jump is worth it when you need to recover files, clone the drive or repurpose the SSD as portable storage without fitting it inside a case.

Capacity limited by drive and USB 2.0

The adapter handles whatever capacity the installed 1.8-inch mSATA SSD provides, passing data through the SATA interface at native drive speed. Through the supplied USB 2.0 cable, sustained transfer rates are capped by the USB 2.0 bus, so large backups or disk images will take longer than over internal SATA. It does not support 2.5-inch mSATA drives or any M.2 NVMe or SATA SSDs.

Pluspunten

  • Connect 1.8 mSATA SSD to standard SATA via 7+15Pin adapter
  • Use included SATA to USB 2.0 cable for external drive access
  • Hot-plug support enables plug-and-play data transfer without driver installs
  • Reliable signal chip ensures stable backup cloning and file recovery
  • Compact board design saves space for portable home office use

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does the 1.8" mSATA adapter require a separate 15-pin SATA power connector?

Yes, the board provides a standard 7+15Pin SATA interface so the drive needs both data and power connections.

Is any driver installation required before the adapter works with Windows, Mac OS or Linux?

No, the adapter uses a plug-and-play control chip that works without extra drivers on those systems.

Can the included USB 2.0 cable remain connected for long-term external use, or is it only for short transfers?

The USB 2.0 cable is designed for convenient external mobile storage and can stay attached for ongoing access.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.