SunnyStar Co., Ltd
SunnyStar Co., Ltd MMF-06D12DS FP2 60mm 25mm 12V .16A 3-pin case fan
A 60 mm square DC cooler with ball bearing, 12 V 0.16 A draw and 3-pin connector for case or server cooling
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 60mm square frame fits tight chassis
- Ball bearing ensures long-life operation
- 12V .16A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits professional builds
60 mm 12 V ball-bearing case fan
This SunnyStar MMF-06D12DS FP2 is a 60 mm square frame 25 mm thick DC cooler that runs on 12 V and draws 0.16 A through a 3-pin connector. It uses a ball bearing for durable rotation and has no LED lighting.
Suits tight industrial chassis
Builders who need PWM speed control or a 4-pin header will not be served by the fixed-voltage 3-pin design. Buyers wanting RGB illumination or larger airflow volumes should look at different form factors.
3-pin 12 V 0.16 A power connector
The 3-pin plug delivers constant 12 V at 0.16 A with no PWM signal, so the fan speed is set by the supply voltage alone. Verify that your board or controller provides a matching 3-pin header before ordering.
Pluspunten
- Compact 60mm square frame fits tight chassis
- Ball bearing ensures long-life operation
- 12V .16A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits professional builds
Specificaties
| Series | MMF-06D12DS FP2 |
|---|---|
| Model | MMF-06D12DS FP2 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Vragen over dit artikel
What power connector does the MMF-06D12DS FP2 fan need from the motherboard or controller?
The fan uses a 3-pin connector that supplies 12 V at 0.16 A, so the header must provide that voltage and current.
Will the 60 mm square frame fit the same mounting holes as other 60 mm fans I already have?
Yes, the 60 mm by 60 mm footprint matches the standard 60 mm mounting pattern used on most cases and server chassis.
How can I confirm the ball-bearing fan is spinning correctly after installation?
Connect the 3-pin header, power on the system, and verify the fan rotates smoothly and moves air through the 25 mm thick frame.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001057BTC
Op voorraad