暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm square case fan 25mm thick 3-pin connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd MMF-06D12DS FP2 60mm 25mm 12V .16A 3-pin case fan

SKU CH-SHS4-9PBBN

A 60 mm square DC cooler with ball bearing, 12 V 0.16 A draw and 3-pin connector for case or server cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60mm square frame fits tight chassis
  • Ball bearing ensures long-life operation
  • 12V .16A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Non-LED black design suits professional builds

60 mm 12 V ball-bearing case fan

This SunnyStar MMF-06D12DS FP2 is a 60 mm square frame 25 mm thick DC cooler that runs on 12 V and draws 0.16 A through a 3-pin connector. It uses a ball bearing for durable rotation and has no LED lighting.

Suits tight industrial chassis

Builders who need PWM speed control or a 4-pin header will not be served by the fixed-voltage 3-pin design. Buyers wanting RGB illumination or larger airflow volumes should look at different form factors.

3-pin 12 V 0.16 A power connector

The 3-pin plug delivers constant 12 V at 0.16 A with no PWM signal, so the fan speed is set by the supply voltage alone. Verify that your board or controller provides a matching 3-pin header before ordering.

特長

  • Compact 60mm square frame fits tight chassis
  • Ball bearing ensures long-life operation
  • 12V .16A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Non-LED black design suits professional builds

仕様

SeriesMMF-06D12DS FP2
ModelMMF-06D12DS FP2
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

この商品に関する質問

What power connector does the MMF-06D12DS FP2 fan need from the motherboard or controller?

The fan uses a 3-pin connector that supplies 12 V at 0.16 A, so the header must provide that voltage and current.

Will the 60 mm square frame fit the same mounting holes as other 60 mm fans I already have?

Yes, the 60 mm by 60 mm footprint matches the standard 60 mm mounting pattern used on most cases and server chassis.

How can I confirm the ball-bearing fan is spinning correctly after installation?

Connect the 3-pin header, power on the system, and verify the fan rotates smoothly and moves air through the 25 mm thick frame.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。