SunnyStar Co., Ltd
SunnyStar Co., Ltd MMF-06D12DS FP2 60mm 25mm 12V .16A 3-pin case fan
A 60 mm square DC cooler with ball bearing, 12 V 0.16 A draw and 3-pin connector for case or server cooling
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Compact 60mm square frame fits tight chassis
- Ball bearing ensures long-life operation
- 12V .16A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits professional builds
60 mm 12 V ball-bearing case fan
This SunnyStar MMF-06D12DS FP2 is a 60 mm square frame 25 mm thick DC cooler that runs on 12 V and draws 0.16 A through a 3-pin connector. It uses a ball bearing for durable rotation and has no LED lighting.
Suits tight industrial chassis
Builders who need PWM speed control or a 4-pin header will not be served by the fixed-voltage 3-pin design. Buyers wanting RGB illumination or larger airflow volumes should look at different form factors.
3-pin 12 V 0.16 A power connector
The 3-pin plug delivers constant 12 V at 0.16 A with no PWM signal, so the fan speed is set by the supply voltage alone. Verify that your board or controller provides a matching 3-pin header before ordering.
Najważniejsze cechy
- Compact 60mm square frame fits tight chassis
- Ball bearing ensures long-life operation
- 12V .16A draw keeps power use low
- 3-pin connector enables speed monitoring
- Non-LED black design suits professional builds
Specyfikacja
| Series | MMF-06D12DS FP2 |
|---|---|
| Model | MMF-06D12DS FP2 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 60*60*25mm |
Pytania dotyczące tego produktu
What power connector does the MMF-06D12DS FP2 fan need from the motherboard or controller?
The fan uses a 3-pin connector that supplies 12 V at 0.16 A, so the header must provide that voltage and current.
Will the 60 mm square frame fit the same mounting holes as other 60 mm fans I already have?
Yes, the 60 mm by 60 mm footprint matches the standard 60 mm mounting pattern used on most cases and server chassis.
How can I confirm the ball-bearing fan is spinning correctly after installation?
Connect the 3-pin header, power on the system, and verify the fan rotates smoothly and moves air through the 25 mm thick frame.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001045BTC
Dostępny