Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2690 v4 14-core 16GB DDR4 4x 3.5" bays

SKU CH-PDV5-XX8G6

1U rack server with dual 14-core Xeon 2.6 GHz CPUs, 16 GB DDR4 ECC, MegaRAID 9361-8i, four 3.5-inch hot-swap bays, quad 10GBase-T ports, IPMI 2.0, and redundant 750 W power supplies

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores14-Core Processor
  • Dual 14-core Xeon processors at 2.6 GHz for parallel workloads
  • 16 GB DDR4 ECC memory installed across 24 DIMM slots
  • MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50, 60
  • Quad 10GBase-T ports via Intel X540 controller
  • Dual 750 W platinum power supplies with hot-swap redundancy

1U dual-Xeon server with four 3.5" bays

This 1U rackmount system ships with two Intel Xeon E5-2690 v4 processors, each running at 2.60 GHz with 14 cores. Sixteen gigabytes of DDR4 2400 MHz registered ECC memory are installed across two DIMMs. A MegaRAID 9361-8i controller provides eight internal SAS 12 Gb/s ports with 1 GB cache and battery backup. Four hot-plug 3.5-inch trays accept SATA or SAS drives, and quad 10GBase-T ports handle network traffic.

Suits dense virtualisation

The dual-socket layout and 24 DIMM slots support up to 1.5 TB of memory for memory-heavy workloads. IPMI 2.0 with dedicated LAN gives full remote KVM and virtual media access. Redundant 750 W platinum power supplies keep the platform running during a module failure. Buyers who need more than four 3.5-inch spindles or who require 2.5-inch bay density should look at a different chassis.

Four 3.5-inch hot-plug bays define storage capacity

Only four large-form-factor drives fit in the front, so total raw capacity is limited by the number of 3.5-inch drives you populate. The onboard MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50 and 60 across those bays. If the application demands more spindles or a different drive form factor, this 1U model will not accommodate it.

Pluspunten

  • Dual 14-core Xeon processors at 2.6 GHz for parallel workloads
  • 16 GB DDR4 ECC memory installed across 24 DIMM slots
  • MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50, 60
  • Quad 10GBase-T ports via Intel X540 controller
  • Dual 750 W platinum power supplies with hot-swap redundancy

Specificaties

BrandSUPERMICRO
SeriesCSE-819U + X10DRU-i+
ModelSYS-6018U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors InstalledE5-2690 V4
Installed Memory Size16GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSupermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features4 x 3.5" SATA/SAS Hot-Plug Drive Bays

Vragen over dit artikel

How loud or hot does the dual Xeon E5-2690 v4 14-core setup get with the 750 W platinum PSUs running 24/7?

The 1U chassis uses redundant 750 W platinum supplies and front-to-rear airflow; under full load the dual 14-core CPUs at 2.6 GHz will draw significant power and generate noticeable fan noise typical of dense rack servers.

What drives and caddies must I already own to populate the four 3.5-inch hot-plug bays?

The system ships with four 3.5-inch trays but no drives; you need 3.5-inch SATA or SAS hard drives or SSDs that fit the MegaRAID 9361-8i controller.

Will the LSI MegaRAID 9361-8i and quad 10GBase-T ports work with my older SAS-6Gb/s arrays and 1 GbE switches?

The 9361-8i supports SAS 12 Gb/s and is backward compatible with 6 Gb/s and 3 Gb/s drives; the Intel X540 10GBase-T ports auto-negotiate down to 1 GbE on legacy switches.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.