Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2690 v4 14-core 16GB DDR4 4x 3.5" bays

SKU CH-PDV5-XX8G6

1U rack server with dual 14-core Xeon 2.6 GHz CPUs, 16 GB DDR4 ECC, MegaRAID 9361-8i, four 3.5-inch hot-swap bays, quad 10GBase-T ports, IPMI 2.0, and redundant 750 W power supplies

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores14-Core Processor
  • Dual 14-core Xeon processors at 2.6 GHz for parallel workloads
  • 16 GB DDR4 ECC memory installed across 24 DIMM slots
  • MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50, 60
  • Quad 10GBase-T ports via Intel X540 controller
  • Dual 750 W platinum power supplies with hot-swap redundancy

1U dual-Xeon server with four 3.5" bays

This 1U rackmount system ships with two Intel Xeon E5-2690 v4 processors, each running at 2.60 GHz with 14 cores. Sixteen gigabytes of DDR4 2400 MHz registered ECC memory are installed across two DIMMs. A MegaRAID 9361-8i controller provides eight internal SAS 12 Gb/s ports with 1 GB cache and battery backup. Four hot-plug 3.5-inch trays accept SATA or SAS drives, and quad 10GBase-T ports handle network traffic.

Suits dense virtualisation

The dual-socket layout and 24 DIMM slots support up to 1.5 TB of memory for memory-heavy workloads. IPMI 2.0 with dedicated LAN gives full remote KVM and virtual media access. Redundant 750 W platinum power supplies keep the platform running during a module failure. Buyers who need more than four 3.5-inch spindles or who require 2.5-inch bay density should look at a different chassis.

Four 3.5-inch hot-plug bays define storage capacity

Only four large-form-factor drives fit in the front, so total raw capacity is limited by the number of 3.5-inch drives you populate. The onboard MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50 and 60 across those bays. If the application demands more spindles or a different drive form factor, this 1U model will not accommodate it.

Puntos fuertes

  • Dual 14-core Xeon processors at 2.6 GHz for parallel workloads
  • 16 GB DDR4 ECC memory installed across 24 DIMM slots
  • MegaRAID 9361-8i supports RAID 0, 1, 5, 6, 10, 50, 60
  • Quad 10GBase-T ports via Intel X540 controller
  • Dual 750 W platinum power supplies with hot-swap redundancy

Especificaciones

BrandSUPERMICRO
SeriesCSE-819U + X10DRU-i+
ModelSYS-6018U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors InstalledE5-2690 V4
Installed Memory Size16GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSupermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features4 x 3.5" SATA/SAS Hot-Plug Drive Bays

Preguntas sobre este artículo

How loud or hot does the dual Xeon E5-2690 v4 14-core setup get with the 750 W platinum PSUs running 24/7?

The 1U chassis uses redundant 750 W platinum supplies and front-to-rear airflow; under full load the dual 14-core CPUs at 2.6 GHz will draw significant power and generate noticeable fan noise typical of dense rack servers.

What drives and caddies must I already own to populate the four 3.5-inch hot-plug bays?

The system ships with four 3.5-inch trays but no drives; you need 3.5-inch SATA or SAS hard drives or SSDs that fit the MegaRAID 9361-8i controller.

Will the LSI MegaRAID 9361-8i and quad 10GBase-T ports work with my older SAS-6Gb/s arrays and 1 GbE switches?

The 9361-8i supports SAS 12 Gb/s and is backward compatible with 6 Gb/s and 3 Gb/s drives; the Intel X540 10GBase-T ports auto-negotiate down to 1 GbE on legacy switches.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.