Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Blue 1.75 mm filament spool, 1 lb, glossy finish

Taulman 3D

Taulman 3D N-vent 1.75mm 1lb Blue Filament

SKU CH-5GQY-5A2XN

Low-odor, styrene-free filament prints at 250–255 °C with 1.75 mm diameter, delivering clear, glossy parts that retain mechanical properties

  • ColorBlue
  • TypeFilament
  • Low-odor printing environment with styrene-free formulation
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing at 250-255°C nozzle temperature
  • Durable property retention for functional 3D applications
  • Compatible with standard 1.75mm filament printers

Blue N-vent Filament for Functional 3D Prints

This 1.75 mm Taulman 3D filament uses Eastman Amphora polymer to deliver clarity, gloss and low-odour, styrene-free printing. It targets makers who need durable, attractive parts without strong fumes during extrusion. The material retains its mechanical properties in finished 3D applications.

Practical Printing Temperature Window

The filament requires a nozzle temperature between 250 and 255 °C for reliable flow. Printers that cannot reach or hold this range will struggle with layer adhesion and surface finish. Users must verify their hot-end capability before purchase.

Upgrade from Standard PLA or ABS Spools

Switching makes sense when you need better toughness and lower odour than basic PLA, or want to avoid styrene emissions from ABS. It is not suited for buyers who need flexible TPU characteristics or high-temperature resistance beyond this polymer's range.

Pluspunten

  • Low-odor printing environment with styrene-free formulation
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing at 250-255°C nozzle temperature
  • Durable property retention for functional 3D applications
  • Compatible with standard 1.75mm filament printers

Specificaties

Brandtaulman3d
ColorBlue
TypeFilament

Vragen over dit artikel

Should I choose the 1.75 mm diameter or a different size?

The spool is 1.75 mm diameter, matching most desktop printers that use that standard.

What does the 250–255 °C nozzle temperature mean for my prints?

Heat the hot-end to between 250 and 255 °C; the Amphora polymer flows cleanly in that range with low odor and no styrene.

Does the 1.75 mm filament work with Bowden or direct-drive extruders?

The 1.75 mm size is compatible with both Bowden and direct-drive setups that accept 1.75 mm stock.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.