暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Blue 1.75 mm filament spool, 1 lb, glossy finish

Taulman 3D

Taulman 3D N-vent 1.75mm 1lb Blue Filament

SKU CH-5GQY-5A2XN

Low-odor, styrene-free filament prints at 250–255 °C with 1.75 mm diameter, delivering clear, glossy parts that retain mechanical properties

  • ColorBlue
  • TypeFilament
  • Low-odor printing environment with styrene-free formulation
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing at 250-255°C nozzle temperature
  • Durable property retention for functional 3D applications
  • Compatible with standard 1.75mm filament printers

Blue N-vent Filament for Functional 3D Prints

This 1.75 mm Taulman 3D filament uses Eastman Amphora polymer to deliver clarity, gloss and low-odour, styrene-free printing. It targets makers who need durable, attractive parts without strong fumes during extrusion. The material retains its mechanical properties in finished 3D applications.

Practical Printing Temperature Window

The filament requires a nozzle temperature between 250 and 255 °C for reliable flow. Printers that cannot reach or hold this range will struggle with layer adhesion and surface finish. Users must verify their hot-end capability before purchase.

Upgrade from Standard PLA or ABS Spools

Switching makes sense when you need better toughness and lower odour than basic PLA, or want to avoid styrene emissions from ABS. It is not suited for buyers who need flexible TPU characteristics or high-temperature resistance beyond this polymer's range.

特長

  • Low-odor printing environment with styrene-free formulation
  • Clear glossy finish enhances visual quality of printed parts
  • Easy processing at 250-255°C nozzle temperature
  • Durable property retention for functional 3D applications
  • Compatible with standard 1.75mm filament printers

仕様

Brandtaulman3d
ColorBlue
TypeFilament

この商品に関する質問

Should I choose the 1.75 mm diameter or a different size?

The spool is 1.75 mm diameter, matching most desktop printers that use that standard.

What does the 250–255 °C nozzle temperature mean for my prints?

Heat the hot-end to between 250 and 255 °C; the Amphora polymer flows cleanly in that range with low odor and no styrene.

Does the 1.75 mm filament work with Bowden or direct-drive extruders?

The 1.75 mm size is compatible with both Bowden and direct-drive setups that accept 1.75 mm stock.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。