Adiven
Adiven AD-STAIDE-1 2026 Hard Drive Reader USB 3.0 SATA IDE Adapter
Connects 2.5" and 3.5" SATA or IDE drives plus 5.25" optical drives via USB 3.0 or USB-C with a 12V/2A power adapter included
- ColorBlack
- Size2.5" & 3.5"
- TypeEnclosure
- AC AdapterYES
- MaterialABS
- Internal InterfaceIDE / SATA
- Reads SATA, IDE and 5.25" optical drives via USB 3.0
- Transfers data at up to 5 Gbps with USB 2.0 fallback
- Powers 3.5" drives with included 12V 2A adapter
- Dual USB-A and USB-C cable fits any host port
- Hot-swap capable for quick drive changes without reboot
Universal drive reader
The Adiven AD-STAIDE-1 connects SATA and IDE hard drives or optical drives to a computer through USB 3.0 and USB-C ports. It accepts 2.5 and 3.5 inch HDDs or SSDs, 2.5 and 3.5 inch IDE drives and 5.25 inch optical drives. The kit is intended for data recovery, backup or cloning tasks on Windows or Mac systems. No driver installation is required for basic operation.
Thermals and power
The unit draws power from the included 12V 2A adapter and a 4-pin cable when a 3.5 inch drive is attached. Smaller drives can run from the host port alone. The ABS housing passively dissipates heat without a fan, so the adapter adds no audible noise during normal use. Power consumption scales with the connected drive rather than the adapter itself.
Included accessories
A dual-head USB-A and USB-C cable lets the adapter plug into almost any modern or legacy port without a separate dongle. The 40-pin and 44-pin IDE connectors plus one SATA III connector allow three drives to be read simultaneously. The manual explains the jumper setting required for older IDE drives to appear correctly in disk management.
Najważniejsze cechy
- Reads SATA, IDE and 5.25" optical drives via USB 3.0
- Transfers data at up to 5 Gbps with USB 2.0 fallback
- Powers 3.5" drives with included 12V 2A adapter
- Dual USB-A and USB-C cable fits any host port
- Hot-swap capable for quick drive changes without reboot
Specyfikacja
| Brand | Adiven |
|---|---|
| Series | 2026 Hard Drive Reader USB 3.0 to SATA IDE Adapter |
| Model | IDE SATA to USB + Type C External Hard Drive Adapter Data Recovery Converter Kit |
| Part Number | AD-STAIDE-1 |
| Color | Black |
| Size | 2.5" & 3.5" |
| Type | Enclosure |
| AC Adapter | YES |
| Material | ABS |
| Internal Interface | IDE / SATA |
| External Interface | 2.5" & 3.5" |
| Number of Bay | 3 |
| Features | UNIVERSAL HARD DRIVE READER: SATA and IDE to USB 3.0 adapter supports 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, 5.25" DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW optical drive. With dual-head IDE connector (40pin and 44pin) plus one SATA III connector, lt's compatible with 2.5"/3.5" DE/SATA hard drives 5G BPS HIGH SPEED TRANSFER: This IDE to SATA Hard Drive adapter is designed with a USB 3.0 port that supports high-speed, enabling data transfer rates of up to 5Gbps. Data transfer process is exceptionally simple and effortless. Additionally, our ultra recovery converter maintains backward compat |
| Package Contents | Hard driver readerx1, 4-pin power cablex1, 12V/2A power adapterx1, USB C and USB 2-In-1 cablex1, manualx1 |
Pytania dotyczące tego produktu
How do I install a 3.5-inch IDE drive using the 40-pin connector and the 12V/2A power adapter?
Connect the 40-pin IDE cable to the drive, attach the 4-pin power cable from the 12V/2A adapter, set the drive jumper to slave, then plug the USB 3.0 or USB-C cable into the computer.
What maintenance will the 12V/2A power adapter and 4-pin cable need over time?
Inspect the 4-pin cable and power adapter for worn pins or cracked insulation; replace either piece if the drive fails to spin up or disconnects during transfers.
What limit appears first when reading three drives at once over USB 3.0?
The shared 5Gbps USB 3.0 bandwidth becomes the bottleneck when 2.5-inch, 3.5-inch and 5.25-inch drives operate simultaneously.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
