Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Square grey thermal pad, 100 by 100 by 1.0 mm

ARCTIC

ARCTIC TP-4 Thermal Pad 100x100x1.0mm

SKU CH-XGRR-DT3T2

Soft silicone pad fills gaps on RAM, GPUs, laptops and consoles, compresses from 0.5 mm to 0.3 mm for up to 40 % better contact, and stacks to 2.0 mm

  • High thermal conductivity outperforms many high-end alternatives
  • Compresses from 0.5 mm to 0.3 mm reducing thermal resistance up to 40%
  • Soft silicone adapts to uneven surfaces and air gaps for reliable contact
  • Electrically insulating, non-adhesive and vibration-dampening for secure handling
  • Stackable up to 2.0 mm for versatile use on RAM, GPUs, laptops and consoles

Ideal for RAM, GPUs, laptops and consoles

The ARCTIC TP-4 is a silicone-based thermal pad measuring 100 x 100 x 1.0 mm. It is designed for builders and technicians who need to transfer heat from memory modules, graphics cards, console APUs, laptop chipsets or M.2 SSDs. The electrically insulating material is non-adhesive and vibration-dampening, making it safe for direct contact with exposed circuitry.

Stackable design allows thicknesses up to 2.0 mm

The pad can be layered to bridge larger gaps, while its high compressibility lets it thin from 0.5 mm to 0.3 mm under pressure. This reduces thermal resistance by up to 40 percent and compensates for uneven surfaces or height differences between the component and the heatsink. The soft compound conforms without stressing fragile dies or solder balls.

Check the gap height and surface area before

Verify that the 1.0 mm single-layer thickness or a stacked combination matches the distance between your chip and cooler. Ensure the 100 x 100 mm sheet provides enough material for the die size and any surrounding components you intend to cover. The pad is non-adhesive, so plan for mounting pressure from the heatsink or retention bracket to hold it in place.

Najważniejsze cechy

  • High thermal conductivity outperforms many high-end alternatives
  • Compresses from 0.5 mm to 0.3 mm reducing thermal resistance up to 40%
  • Soft silicone adapts to uneven surfaces and air gaps for reliable contact
  • Electrically insulating, non-adhesive and vibration-dampening for secure handling
  • Stackable up to 2.0 mm for versatile use on RAM, GPUs, laptops and consoles

Specyfikacja

Na razie brak opublikowanej specyfikacji tego produktu.

Pytania dotyczące tego produktu

How often does the TP-4 thermal pad need to be replaced?

The pad is designed for long-term reliability and does not require scheduled replacement; swap it only when you disassemble the cooler or if performance drops.

What thickness limit stops the pad from compressing further under sustained clamping pressure?

The material compresses from 0.5 mm down to 0.3 mm, so the practical limit is the 0.3 mm fully compressed state.

Does the TP-4 pad generate any noise or heat of its own during all-day operation?

No — it is a passive silicone pad with no moving parts, so it adds zero noise and no active heat; it simply conducts heat away from the component.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.