Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Square grey thermal pad, 100 by 100 by 1.0 mm

ARCTIC

ARCTIC TP-4 Thermal Pad 100x100x1.0mm

SKU CH-XGRR-DT3T2

Soft silicone pad fills gaps on RAM, GPUs, laptops and consoles, compresses from 0.5 mm to 0.3 mm for up to 40 % better contact, and stacks to 2.0 mm

  • High thermal conductivity outperforms many high-end alternatives
  • Compresses from 0.5 mm to 0.3 mm reducing thermal resistance up to 40%
  • Soft silicone adapts to uneven surfaces and air gaps for reliable contact
  • Electrically insulating, non-adhesive and vibration-dampening for secure handling
  • Stackable up to 2.0 mm for versatile use on RAM, GPUs, laptops and consoles

Ideal for RAM, GPUs, laptops and consoles

The ARCTIC TP-4 is a silicone-based thermal pad measuring 100 x 100 x 1.0 mm. It is designed for builders and technicians who need to transfer heat from memory modules, graphics cards, console APUs, laptop chipsets or M.2 SSDs. The electrically insulating material is non-adhesive and vibration-dampening, making it safe for direct contact with exposed circuitry.

Stackable design allows thicknesses up to 2.0 mm

The pad can be layered to bridge larger gaps, while its high compressibility lets it thin from 0.5 mm to 0.3 mm under pressure. This reduces thermal resistance by up to 40 percent and compensates for uneven surfaces or height differences between the component and the heatsink. The soft compound conforms without stressing fragile dies or solder balls.

Check the gap height and surface area before

Verify that the 1.0 mm single-layer thickness or a stacked combination matches the distance between your chip and cooler. Ensure the 100 x 100 mm sheet provides enough material for the die size and any surrounding components you intend to cover. The pad is non-adhesive, so plan for mounting pressure from the heatsink or retention bracket to hold it in place.

Puntos fuertes

  • High thermal conductivity outperforms many high-end alternatives
  • Compresses from 0.5 mm to 0.3 mm reducing thermal resistance up to 40%
  • Soft silicone adapts to uneven surfaces and air gaps for reliable contact
  • Electrically insulating, non-adhesive and vibration-dampening for secure handling
  • Stackable up to 2.0 mm for versatile use on RAM, GPUs, laptops and consoles

Especificaciones

Aún no hay especificaciones publicadas para este artículo.

Preguntas sobre este artículo

How often does the TP-4 thermal pad need to be replaced?

The pad is designed for long-term reliability and does not require scheduled replacement; swap it only when you disassemble the cooler or if performance drops.

What thickness limit stops the pad from compressing further under sustained clamping pressure?

The material compresses from 0.5 mm down to 0.3 mm, so the practical limit is the 0.3 mm fully compressed state.

Does the TP-4 pad generate any noise or heat of its own during all-day operation?

No — it is a passive silicone pad with no moving parts, so it adds zero noise and no active heat; it simply conducts heat away from the component.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.