Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green 288-pin DDR4 RDIMM with black chips and silver contacts

Brute Networks

Brute Networks 8GB DDR4-2133 ECC Registered RDIMM 1Rx4 CL15 1.2V

SKU CH-TMVP-PV9TC

Dell-compatible 8 GB DDR4-2133 ECC registered RDIMM with CL15 latency and 1.2 V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed handles demanding server workloads
  • 20 V operation reduces power draw per module
  • 1Rx4 single-rank layout fits dense memory configurations
  • 288-pin DDR4 form factor installs in standard server slots

Dell-compatible 8 GB RDIMM for servers

This Brute Networks module is an 8 GB DDR4-2133 ECC registered DIMM built to match Dell part 370-ABWO. It targets administrators upgrading compatible Dell servers who need error-correcting memory to protect data integrity in production workloads. The 1Rx4 organisation and 1.20 V operation follow the PC4-17000 standard for registered server memory.

Capacity and headroom in multi-DIMM configurations

Each stick adds 8 GB of registered ECC capacity, letting a supported platform scale toward its maximum populated rank limit. The single-rank x4 layout keeps electrical loading low, so larger configurations remain stable at the rated 2133 MT/s. Systems that require higher densities per slot or faster transfer rates will need modules with different specifications.

Thermals, noise and power draw in normal use

Registered DDR4 modules run passively without fans, so they add no acoustic noise to the chassis. At 1.2 V the power draw per DIMM stays modest, leaving the server’s existing airflow and cooling design unchanged. Standard server airflow is sufficient to maintain normal operating temperatures under typical load.

Najważniejsze cechy

  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed handles demanding server workloads
  • 20 V operation reduces power draw per module
  • 1Rx4 single-rank layout fits dense memory configurations
  • 288-pin DDR4 form factor installs in standard server slots

Specyfikacja

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Pytania dotyczące tego produktu

Will this DDR4-2133 CL15 1Rx4 RDIMM work with other DDR4 modules already in my server?

The module runs at 2133 MT/s with CL15 timing and 1.20 V. For stable operation all installed DIMMs must match the same speed, voltage and registered ECC specification; the system will clock them to the lowest common rate.

How can I verify the 8 GB DDR4-2133 RDIMM is recognised and running with ECC after installation?

Check the BIOS or UEFI memory information screen — it should show 8 GB per module, 2133 MT/s, CL15, 1.20 V and ECC enabled. Operating system tools such as dmidecode or CPU-Z will also report registered ECC status.

What is included with the Brute Networks 8 GB RDIMM and do I need anything else to install it?

The box contains the 288-pin DDR4 RDIMM only. No additional cables, brackets or software are required; ensure your server has a free 288-pin DDR4 RDIMM slot and supports registered ECC memory.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.