We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM with black chips and silver contacts

Brute Networks

Brute Networks 8GB DDR4-2133 ECC Registered RDIMM 1Rx4 CL15 1.2V

SKU CH-TMVP-PV9TC

Dell-compatible 8 GB DDR4-2133 ECC registered RDIMM with CL15 latency and 1.2 V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed handles demanding server workloads
  • 20 V operation reduces power draw per module
  • 1Rx4 single-rank layout fits dense memory configurations
  • 288-pin DDR4 form factor installs in standard server slots

Dell-compatible 8 GB RDIMM for servers

This Brute Networks module is an 8 GB DDR4-2133 ECC registered DIMM built to match Dell part 370-ABWO. It targets administrators upgrading compatible Dell servers who need error-correcting memory to protect data integrity in production workloads. The 1Rx4 organisation and 1.20 V operation follow the PC4-17000 standard for registered server memory.

Capacity and headroom in multi-DIMM configurations

Each stick adds 8 GB of registered ECC capacity, letting a supported platform scale toward its maximum populated rank limit. The single-rank x4 layout keeps electrical loading low, so larger configurations remain stable at the rated 2133 MT/s. Systems that require higher densities per slot or faster transfer rates will need modules with different specifications.

Thermals, noise and power draw in normal use

Registered DDR4 modules run passively without fans, so they add no acoustic noise to the chassis. At 1.2 V the power draw per DIMM stays modest, leaving the server’s existing airflow and cooling design unchanged. Standard server airflow is sufficient to maintain normal operating temperatures under typical load.

Highlights

  • ECC protection prevents data corruption with registered design
  • 2133 MHz DDR4 speed handles demanding server workloads
  • 20 V operation reduces power draw per module
  • 1Rx4 single-rank layout fits dense memory configurations
  • 288-pin DDR4 form factor installs in standard server slots

Specifications

BrandDell
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset

Questions about this item

Will this DDR4-2133 CL15 1Rx4 RDIMM work with other DDR4 modules already in my server?

The module runs at 2133 MT/s with CL15 timing and 1.20 V. For stable operation all installed DIMMs must match the same speed, voltage and registered ECC specification; the system will clock them to the lowest common rate.

How can I verify the 8 GB DDR4-2133 RDIMM is recognised and running with ECC after installation?

Check the BIOS or UEFI memory information screen — it should show 8 GB per module, 2133 MT/s, CL15, 1.20 V and ECC enabled. Operating system tools such as dmidecode or CPU-Z will also report registered ECC status.

What is included with the Brute Networks 8 GB RDIMM and do I need anything else to install it?

The box contains the 288-pin DDR4 RDIMM only. No additional cables, brackets or software are required; ensure your server has a free 288-pin DDR4 RDIMM slot and supports registered ECC memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.