DELL
DELL NF8WP 1.8TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive
A 1.8TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-performance storage
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1.8TB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 8TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS interface supports 12Gb/s transfer rates
- 5 inch form factor fits dense server bays
- Dell original part NF8WP ensures system compatibility
Dell NF8WP 1.8TB SAS 12Gb/s 10K HDD
This Dell NF8WP is a 1.8TB internal hard drive with a 2.5-inch form factor. It connects through a SAS interface rated at 12Gb/s and spins at 10000 RPM. The drive is supplied new without a tray or caddy.
Suited for SAS arrays needing 10K speed.
This drive suits servers and storage arrays that accept 2.5-inch SAS drives and can use the 12Gb/s link. It is not for systems whose backplane or controller tops out at 6Gb/s. Buyers who need a larger capacity or a different physical size should look at other models.
12Gb/s SAS interface decides compatibility
The single specification that decides fit is the 12Gb/s SAS interface. Your controller or backplane must support this transfer rate to operate the drive at its rated speed.
Najważniejsze cechy
- 8TB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- SAS interface supports 12Gb/s transfer rates
- 5 inch form factor fits dense server bays
- Dell original part NF8WP ensures system compatibility
Specyfikacja
| Brand | Dell |
|---|---|
| Model | NF8WP |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Pytania dotyczące tego produktu
Will the NF8WP 1.8TB 2.5" SAS drive work with my existing 6Gb/s SAS backplane?
Yes, the 12Gb/s SAS interface is backward compatible with 6Gb/s controllers and backplanes; the drive will negotiate the lower link speed automatically.
How can I verify the NF8WP is running at its rated 10000 RPM and 12Gb/s transfer rate after installation?
Check the drive’s reported link speed and rotational speed in your RAID controller BIOS or OS utility such as smartctl; both should show 12Gb/s and 10000 RPM.
Does the NF8WP bare drive include a mounting tray or screws, or must I source them separately?
The drive is supplied as a bare unit without tray or screws; you will need a compatible 2.5" SAS tray and mounting hardware for your chassis.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.



