We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive bare unit

DELL

DELL NF8WP 1.8TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-RF69-0XG3M

A 1.8TB 2.5" SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-performance storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5 inch form factor fits dense server bays
  • Dell original part NF8WP ensures system compatibility

Dell NF8WP 1.8TB SAS 12Gb/s 10K HDD

This Dell NF8WP is a 1.8TB internal hard drive with a 2.5-inch form factor. It connects through a SAS interface rated at 12Gb/s and spins at 10000 RPM. The drive is supplied new without a tray or caddy.

Suited for SAS arrays needing 10K speed.

This drive suits servers and storage arrays that accept 2.5-inch SAS drives and can use the 12Gb/s link. It is not for systems whose backplane or controller tops out at 6Gb/s. Buyers who need a larger capacity or a different physical size should look at other models.

12Gb/s SAS interface decides compatibility

The single specification that decides fit is the 12Gb/s SAS interface. Your controller or backplane must support this transfer rate to operate the drive at its rated speed.

Highlights

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rates
  • 5 inch form factor fits dense server bays
  • Dell original part NF8WP ensures system compatibility

Specifications

BrandDell
ModelNF8WP
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Questions about this item

Will the NF8WP 1.8TB 2.5" SAS drive work with my existing 6Gb/s SAS backplane?

Yes, the 12Gb/s SAS interface is backward compatible with 6Gb/s controllers and backplanes; the drive will negotiate the lower link speed automatically.

How can I verify the NF8WP is running at its rated 10000 RPM and 12Gb/s transfer rate after installation?

Check the drive’s reported link speed and rotational speed in your RAID controller BIOS or OS utility such as smartctl; both should show 12Gb/s and 10000 RPM.

Does the NF8WP bare drive include a mounting tray or screws, or must I source them separately?

The drive is supplied as a bare unit without tray or screws; you will need a compatible 2.5" SAS tray and mounting hardware for your chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.