DELL
DELL PM863a MZ7LM3T8HMLP0D3 3.84TB 1.3 DWPD SATA 2.5in enterprise SSD
3.84TB SATA enterprise SSD rated at 1.3 DWPD with 520 MB/s read and 480 MB/s write speeds plus end-to-end data protection
- Form Factor2.5"
- Capacity3.84TB
- InterfaceSATA III
- Sustained Sequential Read520 MB/s
- Sustained Sequential Write480 MB/s
- Endurance1.3 DWPD
- 84 TB capacity supports large enterprise datasets
- 520 MB/s sustained read accelerates data-intensive workloads
- 480 MB/s sustained write handles heavy write streams
- 3 DWPD endurance rating ensures five-year reliability
- 2 000 000 hours MTBF delivers proven datacentre uptime
Enterprise SATA SSD for data centres
The Dell PM863a MZ7LM3T8HMLP0D3 is a 3.84TB 2.5in SATA III solid-state drive built for enterprise servers, storage arrays and cloud deployments. It delivers sustained sequential reads of 520 MB/s and writes of 480 MB/s with 1.3 DWPD endurance and a 2,000,000-hour MTBF. End-to-end data protection, power-loss protection and thermal monitoring protect data integrity in always-on environments.
Suited to read-heavy workloads.
This drive fits read-heavy applications such as backup targets, archiving tiers, analytics read pools and hyperscale object stores where 1.3 DWPD covers the duty cycle. It is not a fit for workloads that demand higher write endurance, such as heavy database redo logs, write-ahead journals or continuous high-rate ingest pipelines that would exceed the rated DWPD.
Standard 2.5in SATA installation, align partitions
The 2.5in SATA form factor drops into any compatible drive bay or hot-swap tray using standard SATA data and power cables. Ensure the operating system aligns partitions to 4 KiB boundaries and enable AHCI or the appropriate RAID mode in firmware. The most common issue is forgetting to enable the drive's power-loss protection capacitor health monitoring in the management software, which can leave silent data-loss risk undetected.
Najważniejsze cechy
- 84 TB capacity supports large enterprise datasets
- 520 MB/s sustained read accelerates data-intensive workloads
- 480 MB/s sustained write handles heavy write streams
- 3 DWPD endurance rating ensures five-year reliability
- 2 000 000 hours MTBF delivers proven datacentre uptime
Specyfikacja
| Brand | Dell/Samsung |
|---|---|
| Series | PM863a |
| Model | MZ-7LM3T8B |
| Part Number | MZ7LM3T8HMLP0D3 |
| Form Factor | 2.5" |
| Capacity | 3.84TB |
| Interface | SATA III |
| Sustained Sequential Read | 520 MB/s |
| Sustained Sequential Write | 480 MB/s |
| Endurance | 1.3 DWPD |
| MTBF | 2,000,000 hours |
| Features | End-to-End Data Protection, Power Loss Protection, Thermal Monitoring Protection |
Pytania dotyczące tego produktu
Does my server have a 2.5" SATA drive bay and SATA III controller for this PM863a?
The drive fits a standard 2.5" bay and connects via SATA III 6Gb/s, so any server or array with that bay type and controller will accept it directly.
Will the 520 MB/s read and 480 MB/s write speeds be limited if I install it in a SATA II backplane?
On a SATA II 3Gb/s backplane the drive will still work, but sequential reads and writes will cap at the 3Gb/s link rate instead of the rated 520 MB/s and 480 MB/s.
How can I confirm the 1.3 DWPD endurance rating is being honoured after deployment?
Monitor the SMART attribute for total bytes written; it should remain well below the 1.3 drive-writes-per-day threshold for the 3.84TB capacity over the warranty period.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
