DELL PowerEdge M640 Blade 2x Xeon 8160 24C 2.1GHz 64GB DDR4 2x 1.92TB SATA 57810S-K iDRAC9 Enterprise
- Blade
- Blade
Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.
DELL
Dual-socket blade server with 40 total cores, 128 GB DDR4 ECC memory and two 960 GB SATA SSDs in a half-height form factor
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server fitted with two Intel Xeon Gold 6230 processors running at 2.10 GHz with a 3.9 GHz turbo frequency. Each CPU provides 20 cores for a total of 40 threads across the blade. The system ships with 128 GB of DDR4 2666 MHz registered ECC memory installed in eight of sixteen slots. It is intended for virtualization, private cloud and high-performance computing workloads that demand high core counts in a compact chassis slot.
As a blade, the M640 relies on the shared cooling infrastructure of a PowerEdge MX or M1000e enclosure rather than onboard fans. The dual 20-core Xeon Gold 6230 processors have a combined thermal design that the chassis must dissipate under load. Power draw scales with CPU utilisation and the installed SATA SSDs, but the blade form factor concentrates heat in a dense 2.5-inch footprint. Acoustic output is determined by the enclosure fans and will vary with inlet temperature and workload intensity.
The server includes a Broadcom 57810S-K dual-port 10 Gb network daughter card for high-speed fabric connectivity. iDRAC9 Enterprise provides out-of-band remote management with full lifecycle automation and monitoring. The PERC S140 controller manages the two 960 GB SATA SSDs with support for RAID 0, 1, 5 and 10 configurations. No operating system, front bezel or ready rails are included; the blade is designed for direct insertion into a compatible Dell chassis.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 20-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 128GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc S140 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 960GB SATA SSD |
| Raid Level | RAID 0/1/5/10 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Inne wersje tego modelu
Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.
Slide the half-height blade into an empty bay until the latch clicks, then use the iDRAC9 Enterprise interface to inventory the server; the step often missed is confirming the Broadcom 57810S-K 10Gb daughter card is seated before powering on.
Monitor SSD wear via the PERC S140 controller and replace drives when SMART indicators approach end-of-life; DDR4 ECC modules require no scheduled replacement but should be reseated if correctable error counts rise.
The blade's shared chassis cooling and power budget typically cap combined CPU turbo before individual processor thermal limits are reached, throttling frequencies to stay within the enclosure's design envelope.
Także w tym dziale
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Waluta płatności i waluta wyświetlania cen.
Wysyłane z portfela przy kasie
Tylko podgląd — katalog wyceniony jest w dolarach
Brak pasującej waluty.
Wybierz język, w którym wyświetla się strona.
Pierwsza wizyta?
Konto już założone?
Nie ma automatycznego resetowania hasła: ten sklep nie wysyła żadnych e-maili, więc nie ma jednorazowego linku, o który można by poprosić. Adres pozostawiony przy koncie zostanie obsłużony ręcznie.
Zgłoszenie zapisane
Do skrzynki odbiorczej nic nie trafi — ten sklep nie wysyła żadnych e-maili. Zgłoszenia są obsługiwane ręcznie.
Hasło się przypomniało?