GIGABYTE
GIGABYTE G325E1TB 1TB internal SSD Gen3 2500E M.2 2280 PCI-Express 3.0 x4
- Internal Solid Stat…
- Consumer
38,99 USD
0.00048969BTC
Dostępny
GIGABYTE
GIGABYTE G325E500G 500GB internal SSD
M.2 2280 drive with 500GB capacity, PCI-Express 3.0 x4 interface and up to 2300 MB/s read speed
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity500GB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
Options 500GB
- 1TB
- 500GB
- Fast boot and load times with sequential read up to 2300 MB/s
- Responsive file saves and installs with sequential write up to 1500 MB/s
- Fits standard laptop and desktop slots using M.2 2280 form factor
- Connects via PCI-Express 3.0 x4 with NVMe 1.3 protocol
- Stores 500GB of games and apps on 3D NAND flash
Gen3 2500E 500GB NVMe SSD
The GIGABYTE G325E500G is a consumer internal solid state drive using the M.2 2280 form factor and a PCI-Express 3.0 x4 interface. It provides 500GB of storage built on 3D NAND memory. The drive supports NVMe 1.3 with Host Memory Buffer for efficient operation.
Suits PCIe 3.0 builds with an M.2 slot
This drive fits systems that have an M.2 2280 slot wired for PCI-Express 3.0 x4 and want NVMe speeds without moving to a newer platform. It is less suited for workloads that need sustained write throughput beyond 1500 MBps or for motherboards that only offer PCIe 2.0 lanes.
Sequential read up to 2300 MBps
The headline specification is a maximum sequential read of 2300 MBps paired with a maximum sequential write of 1500 MBps. If your primary workload depends on higher sustained write performance, you should evaluate drives with a higher write rating.
Najważniejsze cechy
- Fast boot and load times with sequential read up to 2300 MB/s
- Responsive file saves and installs with sequential write up to 1500 MB/s
- Fits standard laptop and desktop slots using M.2 2280 form factor
- Connects via PCI-Express 3.0 x4 with NVMe 1.3 protocol
- Stores 500GB of games and apps on 3D NAND flash
Specyfikacja
| Brand | GIGABYTE |
|---|---|
| Series | Gen3 2500E GIGABYTE Gen3 2500E SSD 1TB |
| Part Number | G325E500G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 2300 MBps |
| Max Sequential Write | Up to 1500 MBps |
| Waga przesyłki | 0.04 kg |
| Wymiary opakowania | 139 × 80 × 18 mm |
Inne wersje tego modelu
Jeszcze 1 w tej samej serii
Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.
Pytania dotyczące tego produktu
What motherboard slot and keying does the M.2 2280 form factor require?
The drive uses the M.2 2280 form factor and connects through a PCI-Express 3.0 x4 slot with an M-keyed connector.
How is the G325E500G installed, and which step is often missed?
Insert the drive at an angle into the M.2 slot, press it flat, and secure it with the retention screw; the step often missed is enabling NVMe 1.3 in the BIOS so the drive appears as a boot device.
What maintenance does the 500GB 3D NAND drive need over its lifespan?
No scheduled maintenance is required; keep firmware updated, allow the operating system to run TRIM, and monitor health through S.M.A.R.T. attributes.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
