Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular metal external power supply unit, silver-grey finish, front status LEDs and rear AC inlet with DC output ports

HPE

HPE JD183A#ABA H3C RPS 800 Redundant Power Supply 650W

SKU CH-FVHN-SVZQ1

External redundant power supply delivering 650 W of 12 V and -54 V DC backup for compatible H3C switches

  • TypeRedundant Power Supply
  • External redundant backup for H3C S5500-52C-EI switch
  • Cold-backup design activates only on primary supply failure
  • Selectable +12 V or -54 V DC outputs up to 650 W
  • Accepts 110 V and 220 V AC input worldwide
  • Compact 1.7" high rack form factor weighs 8.38 lb

External Redundant Power System

The HPE JD183A#ABA H3C RPS 800 is an external DC power unit designed to provide redundant backup power for compatible H3C network switches. It accepts AC input and delivers selectable DC output voltages to the connected device. This unit serves network administrators who need cold-standby power protection for supported switching equipment. It operates as an external module separate from the switch chassis.

AC Input and Selective DC Output

The unit accepts 110 V AC or 220 V AC input and can supply +12 V DC at 17.25 A, -54 V DC at 12 A, or both voltages concurrently depending on the attached output cables. It features a single +12 V rail and a total rated output power of 650 W. The redundant system only activates its DC output when it detects a primary power supply failure in the powered switch. This cold-backup behaviour limits its use to failover scenarios rather than continuous load-sharing.

Compatibility Limited to Specific Switch Models

The RPS 800 is validated for use with the H3C S5500-52C-EI switch and HP 3Com 4800G 24-port and 48-port switches. Buyers whose infrastructure uses different switch models or vendors cannot use this unit for redundant power. The fixed output voltages and proprietary cabling prevent adaptation to servers, storage arrays, or non-listed network gear. Physical dimensions are 1.7" height, 17.4" width, and 7.2" depth for rack planning.

Najważniejsze cechy

  • External redundant backup for H3C S5500-52C-EI switch
  • Cold-backup design activates only on primary supply failure
  • Selectable +12 V or -54 V DC outputs up to 650 W
  • Accepts 110 V and 220 V AC input worldwide
  • Compact 1.7" high rack form factor weighs 8.38 lb

Specyfikacja

BrandHPE
TypeRedundant Power Supply

Pytania dotyczące tego produktu

Is this RPS 800 unit the only model available for the S5500-52C-EI switch?

The H3C RPS 800-A is the external redundant power system specified for the H3C S5500-52C-EI, accepting 110 V AC or 220 V AC input and delivering up to 650 W total DC output.

What does the 650 W rating mean when the unit is connected to my switch?

It represents the maximum combined DC power the RPS can supply — up to 12 V DC at 17.25 A and -54 V DC at 12 A concurrently — only activating when the switch detects an internal power supply failure.

Which DC output cables determine whether I get +12 V, -54 V or both voltages?

The RPS provides selective DC outputs; the connected output cable or cables dictate whether it delivers +12 V DC, -54 V DC, or both voltages simultaneously to the powered device.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.