Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Small green circuit board with RJ45 port and 16-pin cable, mounted on clear acrylic plate

LORDWORLD

LORDWORLD PCIe Gigabit Ethernet Board (C) for Raspberry Pi 5

SKU CH-BB5T-5C052

Adds a 10/100/1000 Mbps RJ45 port to a Raspberry Pi 5 via the 16-pin PCIe interface using an RTL8111H controller, driver-free on Raspberry Pi OS, with a side-mounted acrylic plate

  • Driver-free setup on Raspberry Pi OS with plug-and-play simplicity
  • 10/100/1000 Mbps wired throughput via RTL8111H controller
  • 16-pin PCIe Gen2 link connects directly to Pi 5 edge connector
  • Side-mounted acrylic plate clears top-side add-ons
  • Compact design keeps Pi 5 expansion options open

Raspberry Pi 5 Gigabit Ethernet Board

This PCIe Gigabit Ethernet board is designed specifically for the Raspberry Pi 5. It connects through the 16-pin PCIe Gen 2 interface using a 16-pin cable. The board uses an RTL8111H controller to provide a 10/100/1000Mbps RJ45 port. It operates driver-free with Raspberry Pi OS for immediate plug-and-play functionality.

Makers needing wired gigabit speeds

Builders who want to add a high-performance wired network link to a Raspberry Pi 5 will find this board fits the 16-pin PCIe slot directly. The side-mounting acrylic plate saves vertical space above the main board. Users whose projects rely on the Pi 5's built-in wireless or who have no free PCIe connection should consider other networking options.

RTL8111H controller with 16-pin PCIe Gen 2 link

The onboard RTL8111H chip handles the physical layer and MAC functions for the single RJ45 port. It negotiates 10, 100, or 1000 Mbps speeds over standard twisted-pair cabling. The 16-pin PCIe Gen 2 connection supplies the required bandwidth and signalling for full gigabit throughput. This specific interface and controller combination determines compatibility with the Raspberry Pi 5.

Najważniejsze cechy

  • Driver-free setup on Raspberry Pi OS with plug-and-play simplicity
  • 10/100/1000 Mbps wired throughput via RTL8111H controller
  • 16-pin PCIe Gen2 link connects directly to Pi 5 edge connector
  • Side-mounted acrylic plate clears top-side add-ons
  • Compact design keeps Pi 5 expansion options open

Specyfikacja

BrandLORDWORLD

Pytania dotyczące tego produktu

Does the RTL8111H controller on this board draw enough power to need extra cooling when the Raspberry Pi 5 runs all day?

The board uses a PCIe x1 Gen2 link and the onboard RTL8111H chip; typical Gigabit Ethernet controllers at this speed stay cool without a heatsink in normal indoor use.

What must I already own to connect this board to a Raspberry Pi 5?

You need a Raspberry Pi 5 with its 16-pin PCIe connector and the supplied 16-pin cable; the board plugs directly into that interface.

Will the side-mounted acrylic plate interfere with HATs or the official active cooler I keep on my Pi 5?

The side-mount design keeps the top of the Pi 5 clear, so existing HATs and the official active cooler remain fully accessible.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.