Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Small green circuit board with RJ45 port and 16-pin cable, mounted on clear acrylic plate

LORDWORLD

LORDWORLD PCIe Gigabit Ethernet Board (C) for Raspberry Pi 5

SKU CH-BB5T-5C052

Adds a 10/100/1000 Mbps RJ45 port to a Raspberry Pi 5 via the 16-pin PCIe interface using an RTL8111H controller, driver-free on Raspberry Pi OS, with a side-mounted acrylic plate

  • Driver-free setup on Raspberry Pi OS with plug-and-play simplicity
  • 10/100/1000 Mbps wired throughput via RTL8111H controller
  • 16-pin PCIe Gen2 link connects directly to Pi 5 edge connector
  • Side-mounted acrylic plate clears top-side add-ons
  • Compact design keeps Pi 5 expansion options open

Raspberry Pi 5 Gigabit Ethernet Board

This PCIe Gigabit Ethernet board is designed specifically for the Raspberry Pi 5. It connects through the 16-pin PCIe Gen 2 interface using a 16-pin cable. The board uses an RTL8111H controller to provide a 10/100/1000Mbps RJ45 port. It operates driver-free with Raspberry Pi OS for immediate plug-and-play functionality.

Makers needing wired gigabit speeds

Builders who want to add a high-performance wired network link to a Raspberry Pi 5 will find this board fits the 16-pin PCIe slot directly. The side-mounting acrylic plate saves vertical space above the main board. Users whose projects rely on the Pi 5's built-in wireless or who have no free PCIe connection should consider other networking options.

RTL8111H controller with 16-pin PCIe Gen 2 link

The onboard RTL8111H chip handles the physical layer and MAC functions for the single RJ45 port. It negotiates 10, 100, or 1000 Mbps speeds over standard twisted-pair cabling. The 16-pin PCIe Gen 2 connection supplies the required bandwidth and signalling for full gigabit throughput. This specific interface and controller combination determines compatibility with the Raspberry Pi 5.

Pontos fortes

  • Driver-free setup on Raspberry Pi OS with plug-and-play simplicity
  • 10/100/1000 Mbps wired throughput via RTL8111H controller
  • 16-pin PCIe Gen2 link connects directly to Pi 5 edge connector
  • Side-mounted acrylic plate clears top-side add-ons
  • Compact design keeps Pi 5 expansion options open

Especificações

BrandLORDWORLD

Perguntas sobre este artigo

Does the RTL8111H controller on this board draw enough power to need extra cooling when the Raspberry Pi 5 runs all day?

The board uses a PCIe x1 Gen2 link and the onboard RTL8111H chip; typical Gigabit Ethernet controllers at this speed stay cool without a heatsink in normal indoor use.

What must I already own to connect this board to a Raspberry Pi 5?

You need a Raspberry Pi 5 with its 16-pin PCIe connector and the supplied 16-pin cable; the board plugs directly into that interface.

Will the side-mounted acrylic plate interfere with HATs or the official active cooler I keep on my Pi 5?

The side-mount design keeps the top of the Pi 5 clear, so existing HATs and the official active cooler remain fully accessible.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.