Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with four blue USB ports and USB-C power input

LORDWORLD

LORDWORLD USB 3.2 Gen1 HUB HAT 4 Ports for Raspberry Pi

SKU CH-ZTZK-3DDAZ

Adds four USB 3.2 Gen1 ports to a Raspberry Pi with an external USB-C power input for stable operation

  • Four USB 3.2 Gen1 ports expand connectivity for keyboards, mice and drives
  • External USB-C 5V power port delivers stable current to power-hungry peripherals
  • Individual port LEDs plus a power LED show real-time connection status
  • Driver-free plug-and-play works with Windows, macOS, Linux and Android
  • Designed for Raspberry Pi 4 and compatible with earlier Pi models

Four-Port USB 3.2 Hub for Raspberry Pi

The LORDWORLD HAT adds four USB 3.2 Gen1 ports to a Raspberry Pi 4 or compatible board. An onboard USB-C 5 V input supplies extra current for bus-powered peripherals. Status LEDs show power and individual port activity. The board works driver-free on Windows, macOS, Linux and Android.

Upgrade from the Pi's native USB ports

The Pi 4 provides only two USB 3.0 ports, so this HAT doubles high-speed connectivity without occupying the PCIe lane. It is worth fitting when you need simultaneous SSD, camera and sensor links that would otherwise saturate the built-in ports. Builds staying within the two native ports gain nothing.

Limited by the USB 3.2 Gen1 uplink

All four downstream ports share the single upstream Gen1 link, so aggregate throughput cannot exceed 5 Gb/s. Heavy concurrent transfers will contend for that bandwidth. The USB-C power input only feeds the hub; it does not back-power the Pi itself.

Najważniejsze cechy

  • Four USB 3.2 Gen1 ports expand connectivity for keyboards, mice and drives
  • External USB-C 5V power port delivers stable current to power-hungry peripherals
  • Individual port LEDs plus a power LED show real-time connection status
  • Driver-free plug-and-play works with Windows, macOS, Linux and Android
  • Designed for Raspberry Pi 4 and compatible with earlier Pi models

Specyfikacja

BrandLORDWORLD

Pytania dotyczące tego produktu

What Raspberry Pi models does the HAT's 40-pin header fit?

It is purpose-made for the Raspberry Pi 4 and also compatible with other Pi versions that share the same 40-pin GPIO header layout.

Does the board need a driver or an external USB-C 5 V supply to work?

No driver is needed — it is plug-and-play on Windows, macOS, Linux and Android — but the onboard USB-C 5 V DC port should be connected for stable power when using high-draw USB 3.2 Gen1 devices.

How can I tell if the hub is receiving power and each port is active?

The HAT provides one power indicator LED and four individual USB port indicator LEDs so you can verify the board is powered and see which ports have an active connection.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.