Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black ABS enclosure with aluminum heatsink and fan for Raspberry Pi 5

MCDODO

MCDODO ABS Case with Armor Lite V5 Active Cooler for Raspberry Pi 5 (Black) 3510

SKU CH-QPGQ-BM4D8

Protects Raspberry Pi 5 with an ABS enclosure and cools it using a 3510 PWM fan, aluminium heatsink and thermal pads

  • TypeSingle Board Computers
  • ABS case protects the Raspberry Pi 5 board
  • Armor Lite V5 cooler combines aluminium heatsink with PWM fan
  • PWM speed regulation works with Raspberry Pi OS
  • 3510 ultra-quiet fan lowers board temperature quickly
  • Removable top cover gives easy GPIO and camera access

Raspberry Pi 5 ABS Case

This ABS enclosure is built for the Raspberry Pi 5 4 GB and 8 GB boards and ships with the Armor Lite V5 active cooler already included. It targets makers and developers who want a ready-to-use thermal solution without sourcing separate parts. The package also contains thermal pads, screws and a screwdriver so the board can be installed immediately. The Raspberry Pi 5 board itself is not included.

PWM Fan with 3510 Ultra-Quiet Operation

The Armor Lite V5 cooler combines an aluminium heatsink with a PWM-controlled fan that regulates speed through Raspberry Pi OS. The 3510 ultra-quiet fan works with the thermal pads to pull heat away from the processor quickly. Because the fan uses PWM, it spins only as fast as needed, keeping acoustic output low during typical workloads. Power for the cooler is drawn directly from the board's fan header.

Lightweight ABS Shell with Removable Top Cover

The case moulding is made from lightweight ABS plastic and features a removable top cover that gives instant access to the GPIO header and camera connectors. Cut-outs align with every onboard port including the USB-C power input, dual micro HDMI outputs, USB ports, Ethernet jack, SD card slot and the power button. All mounting hardware is supplied so the assembly stays secure on a desk or in a project enclosure.

Najważniejsze cechy

  • ABS case protects the Raspberry Pi 5 board
  • Armor Lite V5 cooler combines aluminium heatsink with PWM fan
  • PWM speed regulation works with Raspberry Pi OS
  • 3510 ultra-quiet fan lowers board temperature quickly
  • Removable top cover gives easy GPIO and camera access

Specyfikacja

TypeSingle Board Computers

Pytania dotyczące tego produktu

How do I attach the Armor Lite V5 cooler to my Raspberry Pi 5, and which step do people often miss?

Mount the aluminum heatsink onto the CPU using the supplied thermal pads, then secure the PWM fan assembly with the included screws; the step often missed is placing the thermal pads before tightening the heatsink.

Which parts of the Armor Lite V5 cooler will need replacement after extended use?

The 3510 PWM fan is the only moving part and will eventually wear out; the aluminum heatsink and ABS case require no scheduled replacement.

What thermal limit appears first when the Raspberry Pi 5 runs sustained loads inside this case?

The CPU temperature hits its throttle point before the 3510 fan reaches maximum PWM duty, so thermal throttling is the first limit encountered.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.