Micron
Micron 7450 PRO MTFDKCC15T3TFR-1BC1ZABYYR 15.36 TB enterprise SSD
15.36 TB enterprise NVMe SSD with U.3 interface, PCIe 4.0 x4 speed and 6800 MB/s reads
- Device TypeInternal / External Solid State Drive (SSD)
- 36 TB capacity supports massive datasets
- PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
- U.3 2.5" form factor fits standard server bays
- 28000 TBW endurance handles heavy write workloads
- 2 million hour MTBF ensures enterprise reliability
15.36 TB enterprise NVMe SSD
The Micron 7450 PRO delivers 15.36 TB of storage in a 2.5-inch U.3 form factor. It connects through a PCIe 4.0 x4 interface using NVMe 1.4 protocol. The drive is built for storage systems and servers that require high-capacity solid-state storage.
Sustained write endurance
Rated at 28000 TB of total bytes written, the SSD is engineered for continuous enterprise workloads rather than burst transfers. A mean time between failures of 2 million device hours supports long-term deployment in always-on environments. The 1.2 V I/O voltage helps maintain stable operation under heavy sustained I/O.
6800 MB/s sequential read ceiling
The maximum read transfer rate of 6800 MB/s sets the performance boundary for read-intensive applications. Workloads demanding higher throughput will need additional drives or a faster interface. This figure determines whether the drive matches the throughput requirements of the target server platform.
Najważniejsze cechy
- 36 TB capacity supports massive datasets
- PCIe 4.0 x4 NVMe delivers 6800 MB/s reads
- U.3 2.5" form factor fits standard server bays
- 28000 TBW endurance handles heavy write workloads
- 2 million hour MTBF ensures enterprise reliability
Specyfikacja
| Brand | Micron |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
| Waga przesyłki | 0.45 kg |
| Wymiary opakowania | 25 × 25 × 25 mm |
Pytania dotyczące tego produktu
How much power does the 1.2-volt I/O draw when the 7450 PRO runs continuously in a storage server?
The drive operates at a 1.2-volt I/O voltage, and its NVMe 1.4 interface supports power-state transitions that reduce consumption during idle periods while delivering up to 6800 MB/s under sustained load.
Which server backplane and cabling are required to install this U.3 2.5-inch 15mm SSD?
A U.3-compatible 2.5-inch bay with PCIe 4.0 x4 wiring is needed; the drive plugs directly into the backplane without an adapter and draws power through the same connector.
Will this PCIe 4.0 x4 NVMe drive work in a chassis that only provides PCIe 3.0 x4 slots?
Yes, the NVMe 1.4 interface is backward compatible and will negotiate a PCIe 3.0 x4 link, delivering reduced throughput while retaining the full 15.36 TB capacity and 28000 TB endurance rating.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
