Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular black ATX power supply with modular cable ports and a single cooling fan

MSI

MSI MEG Ai1300P PCIE5 1300W ATX 3.0 power supply

SKU CH-N3XZ-FVZZR

Delivers 1300 W through a fully modular ATX 3.0 design with 80 PLUS Platinum efficiency and native 12VHPWR for 4080 and 4090 graphics cards

  • TypeATX12V
  • Maximum Power1300 W
  • FansHydro Dynamic Bearing
  • PFCActive
  • Main Connector24Pin
  • +12V RailsSingle
  • Delivers 1300 W for 4080 4090 builds
  • 80 PLUS Platinum certified for up to 92% efficiency
  • PCIe 5.0 and ATX 3.0 ready with 12VHPWR cable
  • Full modular design with sleeved cables for clean routing
  • Hydro Dynamic Bearing fan rated Cybenetics Standard ++

High-wattage ATX 3.0 power supply

The MSI MEG Ai1300P PCIE5 delivers 1300 W through a single +12 V rail and meets ATX 3.0 and PCIe 5.0 specifications. It targets builders running flagship graphics cards such as the 4080 or 4090 and workstations that demand sustained high loads. The 80 PLUS Platinum rating confirms up to 92 % efficiency at typical loads.

Full-modular installation with 150 mm depth

A full-modular cable set lets you connect only the leads you need, including eight 6+2-pin PCIe connectors, 16 SATA plugs and the 12VHPWR cable for modern GPUs. The 150 mm chassis fits most mid-tower and larger cases, but compact builds should verify clearance. Sleeved cables improve routing but add stiffness; plan bends before tightening screws.

Check GPU power needs and case length

Confirm your graphics card requires the 12VHPWR connector or multiple 6+2-pin leads before ordering. Measure the available PSU bay depth against the 150 mm unit length. Ensure the motherboard accepts a 24-pin main connector and that the 100-240 V input range matches your local mains supply.

Najważniejsze cechy

  • Delivers 1300 W for 4080 4090 builds
  • 80 PLUS Platinum certified for up to 92% efficiency
  • PCIe 5.0 and ATX 3.0 ready with 12VHPWR cable
  • Full modular design with sleeved cables for clean routing
  • Hydro Dynamic Bearing fan rated Cybenetics Standard ++

Specyfikacja

BrandMSI
ModelMEG Ai1300P PCIE5
Part NumberMEG Ai1300P PCIE5
TypeATX12V
Maximum Power1300 W
FansHydro Dynamic Bearing
PFCActive
Main Connector24Pin
+12V RailsSingle
PCI-Express Connector8 x 6+2-Pin
SATA Power Connector16
Max PSU Length150 mm
ModularFull Modular
Power Good Signal100-500ms
Efficiencyup to 92%
Energy-Efficient80 PLUS PLATINUM Certified
PSU Noise LevelCybenetics Standard ++
Over Voltage ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Connectors1 x ATX Sleeved Cable
1 x EPS (8 PIN to 4+4 PIN) Sleeved Cable
1 x EPS (8 PIN to 8 PIN) Sleeved Cable
6 x PCIe (8 PIN to 6+2 PIN) Sleeved Cable
1 x PCIe (16 PIN to 16 PIN) Sleeved Cable
1 x PCIe (16 PIN to 6+2 PIN) Sleeved Cable
4 x SATA Sleeved Cable
1 x MOLEX/FDD Sleeved Cable
1 x MINI USB to 9PIN
1 x MINI USB to USB Type-A
Dimensions6.30" x 5.91" x 3.39"

Pytania dotyczące tego produktu

How can I confirm the PSU is delivering stable power after installation?

The power-good signal triggers between 100 ms and 500 ms, showing the rails are within spec; the single +12 V rail design and 80 PLUS Platinum efficiency up to 92 % also indicate correct operation.

Which cables come in the box and what must I source separately?

The full-modular unit includes a 24-pin ATX connector, eight 6+2-pin PCIe connectors, sixteen SATA power connectors and a 12VHPWR cable for PCIe 5.0 graphics cards; no extra cables are required for standard builds.

Which capacity should I pick for a system with a 4080 or 4090 class GPU?

The 1300 W Platinum model is ATX 3.0 and PCIe 5.0 ready, providing ample headroom for a 4080 or 4090 plus other components while maintaining high efficiency and low noise.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.