NEMIX RAM
NEMIX RAM 1.5TB DDR5 5600 ECC RDIMM 16x96GB CL46 Supermicro H14SST-G memory upgrade
1.5 TB DDR5 5600 ECC RDIMM kit with 16×96 GB modules at CL46 and 1.1 V for Supermicro H14SST-G
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 5 TB total capacity from 16 modules of 96 GB each
- DDR5 5600 speed with CL46 latency for rated server performance
- 1 V operation meets the board's voltage spec exactly
- Registered ECC design corrects single-bit errors under full load
- 288-pin RDIMM form factor matches the Supermicro H14SST-G slots
Exact-match server upgrade
This 1.5TB kit contains 16 DDR5 5600 RDIMM modules, each 96GB, built to the Supermicro H14SST-G memory specification. Registered ECC architecture with 2Rx4 organisation lets every slot run fully populated at rated speed. CL46 timing and 1.1V operation match the controller defaults for stable production workloads.
Verify population rules first
Consult the motherboard manual for supported capacities per channel, approved DIMM installation order, and any BIOS version requirements before ordering. The board demands 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your chassis has 16 available slots and adequate airflow for a full load.
Thermals noise and power
Bare modules without heat spreaders rely on directed chassis airflow to stay within thermal limits. Registered buffering reduces electrical load on the memory controller, keeping per-module power draw low at 1.1V. Expect silent operation as there are no active cooling components on the DIMMs themselves.
Najważniejsze cechy
- 5 TB total capacity from 16 modules of 96 GB each
- DDR5 5600 speed with CL46 latency for rated server performance
- 1 V operation meets the board's voltage spec exactly
- Registered ECC design corrects single-bit errors under full load
- 288-pin RDIMM form factor matches the Supermicro H14SST-G slots
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Pytania dotyczące tego produktu
What comes in the box and is anything else needed for installation?
The kit contains sixteen 96 GB DDR5 5600 registered ECC RDIMMs for a total of 1.5 TB. No additional memory parts are required; only the Supermicro H14SST-G motherboard and its manual for the correct population order.
How do I decide between the available capacities or speeds for this server?
This is a single 1.5 TB kit running at DDR5 5600 with CL46 timing. Choose it when your H14SST-G configuration calls for the maximum supported capacity at the board's rated speed.
What does the DDR5 5600 rating mean once the modules are installed in the H14SST-G?
The memory will operate at 5600 MT/s with 1.1 V and CL46 latency, delivering the full PC5-44800 bandwidth the motherboard's memory controller expects when all sixteen slots are populated.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



