We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB DDR5 5600 ECC RDIMM 16x96GB CL46 Supermicro H14SST-G memory upgrade

SKU CH-QJKN-QX3HV

1.5 TB DDR5 5600 ECC RDIMM kit with 16×96 GB modules at CL46 and 1.1 V for Supermicro H14SST-G

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5 5600 speed with CL46 latency for rated server performance
  • 1 V operation meets the board's voltage spec exactly
  • Registered ECC design corrects single-bit errors under full load
  • 288-pin RDIMM form factor matches the Supermicro H14SST-G slots

Exact-match server upgrade

This 1.5TB kit contains 16 DDR5 5600 RDIMM modules, each 96GB, built to the Supermicro H14SST-G memory specification. Registered ECC architecture with 2Rx4 organisation lets every slot run fully populated at rated speed. CL46 timing and 1.1V operation match the controller defaults for stable production workloads.

Verify population rules first

Consult the motherboard manual for supported capacities per channel, approved DIMM installation order, and any BIOS version requirements before ordering. The board demands 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm your chassis has 16 available slots and adequate airflow for a full load.

Thermals noise and power

Bare modules without heat spreaders rely on directed chassis airflow to stay within thermal limits. Registered buffering reduces electrical load on the memory controller, keeping per-module power draw low at 1.1V. Expect silent operation as there are no active cooling components on the DIMMs themselves.

Highlights

  • 5 TB total capacity from 16 modules of 96 GB each
  • DDR5 5600 speed with CL46 latency for rated server performance
  • 1 V operation meets the board's voltage spec exactly
  • Registered ECC design corrects single-bit errors under full load
  • 288-pin RDIMM form factor matches the Supermicro H14SST-G slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

What comes in the box and is anything else needed for installation?

The kit contains sixteen 96 GB DDR5 5600 registered ECC RDIMMs for a total of 1.5 TB. No additional memory parts are required; only the Supermicro H14SST-G motherboard and its manual for the correct population order.

How do I decide between the available capacities or speeds for this server?

This is a single 1.5 TB kit running at DDR5 5600 with CL46 timing. Choose it when your H14SST-G configuration calls for the maximum supported capacity at the board's rated speed.

What does the DDR5 5600 rating mean once the modules are installed in the H14SST-G?

The memory will operate at 5600 MT/s with 1.1 V and CL46 latency, delivering the full PC5-44800 bandwidth the motherboard's memory controller expects when all sixteen slots are populated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.