Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 384GB 8x48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V CL52 288-PIN ECC Registered RDIMM memory upgrade

SKU CH-HWPD-5W0F8

384 GB DDR5 server kit with eight 48 GB registered ECC RDIMMs at 6400 MHz, CL52, 1.1 V for the Gigabyte MA34-CP0 motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 384 GB capacity across eight 48 GB modules enables large-scale virtualization and in-memory databases
  • DDR5 6400 MT/s rated speed delivers high memory bandwidth for compute-intensive workloads
  • Registered ECC architecture with 2Rx8 organization maintains data integrity at full population
  • 1 V operating voltage reduces power draw per module in dense server configurations
  • Validated for GIGABYTE MA34-CP0 motherboard ensuring correct slot population and full-speed operation

384GB DDR5-6400 Registered ECC Kit

This NEMIX RAM kit delivers 384GB of DDR5-6400 (PC5-51200) registered ECC memory in eight 48GB modules. Each 288-pin RDIMM operates at 1.1V with CL52 latency and 2Rx8 organization. The registered buffer and on-die ECC are designed for server workloads that require full-capacity stability and silent data corruption protection.

Suited for GIGABYTE MA34-CP0 builds

The kit is validated for the GIGABYTE MA34-CP0 motherboard and matches its DDR5-6400 registered DIMM requirements. It is not for systems that only accept unbuffered UDIMMs, SODIMM form factors, or lower DDR5 speeds. Buyers needing non-ECC memory, different capacities, or consumer desktop platforms should look at other products.

Fits eight-slot server channels

Eight modules fill all DIMM slots on compatible dual-channel or octa-channel server boards, freeing no slots for future expansion. The registered design reduces electrical load on the memory controller, allowing full population at rated speed. Verify the motherboard manual for approved population order and maximum supported capacity before installation.

Najważniejsze cechy

  • 384 GB capacity across eight 48 GB modules enables large-scale virtualization and in-memory databases
  • DDR5 6400 MT/s rated speed delivers high memory bandwidth for compute-intensive workloads
  • Registered ECC architecture with 2Rx8 organization maintains data integrity at full population
  • 1 V operating voltage reduces power draw per module in dense server configurations
  • Validated for GIGABYTE MA34-CP0 motherboard ensuring correct slot population and full-speed operation

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will my GIGABYTE MA34-CP0 motherboard accept all eight 48 GB DDR5 6400 RDIMMs in this kit?

The board must support DDR5 6400 Registered ECC RDIMMs up to 384 GB total across eight slots; verify the manual for approved population order before installing.

Can I mix these 2Rx8 DDR5 6400 Registered ECC modules with other DDR5 RDIMMs of different rank or speed in the same server?

Mixing ranks or speeds is not recommended; the memory controller will downclock all DIMMs to the slowest module and may limit total capacity or stability.

How do I confirm the kit is running at DDR5 6400 with CL52 after installation?

Check the BIOS memory information screen or run a tool like dmidecode to verify each DIMM reports 6400 MT/s, CL52, 1.10 V, and Registered ECC status.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.