Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with gold contacts and black memory chips no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 4800MHz CL40 2Rx8 1.1V ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-ASVF-SSMN7

48GB DDR5 4800MHz ECC Registered RDIMM with CL40 latency and 1.1V operation, validated for Supermicro H14SHM motherboards

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

Pokaż jeszcze 24 konfiguracji
  • 48 GB capacity lets you run larger workloads without swapping
  • DDR5 4800 speed feeds data to the CPU at rated throughput
  • Registered ECC design corrects single-bit errors and keeps the server stable
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM memory slots precisely

48GB DDR5 ECC RDIMM for Supermicro H14SHM

This 48GB DDR5-4800 Registered ECC module is built as an exact-match upgrade for the Supermicro H14SHM motherboard. It delivers the precise 2Rx8 rank structure, 1.1V operating voltage and CL40 timing the board's memory controller expects. System administrators expanding server memory capacity will find it recognised at full rated speed without manual tuning.

288-pin Registered form factor with ECC

The module uses a 288-pin RDIMM design, not a UDIMM or SODIMM, so it seats only in slots wired for Registered memory. Its buffered architecture reduces electrical load on the controller, allowing full population of every supported slot while ECC corrects single-bit errors in real time. No heat spreader is fitted, so airflow across the DIMM rows must be maintained by the chassis fans.

Check motherboard manual for population rules

Supported capacities, approved DIMM population order and installation steps vary by server configuration, so consult the Supermicro H14SHM manual before ordering. The module operates at 1.1V DDR5 standard voltage; systems requiring a different voltage will not be compatible. Buyers needing unbuffered UDIMMs or non-ECC memory for workstation boards should look elsewhere.

Najważniejsze cechy

  • 48 GB capacity lets you run larger workloads without swapping
  • DDR5 4800 speed feeds data to the CPU at rated throughput
  • Registered ECC design corrects single-bit errors and keeps the server stable
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H14SHM memory slots precisely

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What DDR5 speed and CAS latency does this 48GB RDIMM run at?

The module operates at DDR5 4800 (PC5-38400) with a CAS latency of CL40.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot on the Supermicro H14SHM motherboard; it is not a UDIMM or SODIMM.

How do I install this registered ECC module and what population rule do people miss?

Power down, open the chassis, align the notch with the DDR5 RDIMM slot, press firmly until the latches click, then consult the H14SHM manual for the exact DIMM population order required when filling multiple slots.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.