Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 ECC RDIMM Supermicro H13SST-GC memory upgrade

SKU CH-N2GD-KQASD

A 576 GB registered ECC DDR5 kit of six 96 GB modules at 4800 MT/s, CL40, 1.1 V, built for the Supermicro H13SST-GC motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Pokaż jeszcze 24 konfiguracji
  • 576 GB total capacity from six 96 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SST-GC memory slots precisely

Server memory kit for Supermicro H13SST-GC

This 576GB kit contains six 96GB DDR5 4800 ECC Registered RDIMM modules built to the exact rank, voltage and timing the Supermicro H13SST-GC motherboard expects. It is designed for administrators who need to maximise the board's supported capacity with a fully populated, validated configuration.

Thermals and power in normal use

The modules run at 1.10V without heat spreaders, relying on the server's directed airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping the system maintain stable operation when every slot is filled at rated speed.

The specification that decides fit

Only the 288-pin DDR5 RDIMM form factor with ECC and Registered signalling matches the Supermicro H13SST-GC memory slots. UDIMM, SODIMM or non-ECC modules will not be recognised and cannot be used in this system.

Najważniejsze cechy

  • 576 GB total capacity from six 96 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SST-GC memory slots precisely

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I install the six 96GB DDR5 RDIMM modules in the Supermicro H13SST-GC, and which slot order does the manual specify?

Power off the server, open the chassis, and insert each 288-pin RDIMM into the DIMM slots following the exact population sequence shown in the Supermicro H13SST-GC manual; the registered design requires the correct order so the memory controller initialises all 576GB at DDR5-4800 CL40.

What maintenance or replacement will the 2Rx4 ECC registered kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; ECC corrects single-bit errors automatically, and a module is only replaced if the server logs uncorrectable errors or a DIMM fails POST.

What is the first limit reached when the kit runs sustained workloads at DDR5-4800 1.1V?

The registered buffer and 2Rx4 organisation let all six slots run at the rated 4800 MT/s CL40 without down-clocking; the practical ceiling is the Supermicro H13SST-GC memory controller's maximum supported capacity and population rules, not the modules themselves.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.