Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 ECC RDIMM CL40 1.1V Supermicro H13DSG-O-CPU-D

SKU CH-593P-CPAFE

Four 16 GB DDR5 4800 RDIMM modules with ECC and registered buffering deliver 64 GB for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Pokaż jeszcze 30 konfiguracji
  • 64 GB total capacity from four 16 GB modules for full population
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC architecture corrects single-bit errors and stabilises every slot
  • 1 V operation matches the motherboard memory controller specification
  • Verified fitment for Supermicro H13DSG-O-CPU-D with 288-pin RDIMM form factor

64 GB DDR5 ECC RDIMM kit for Supermicro

This NEMIX RAM kit delivers 64 GB of DDR5 4800 registered ECC memory in a 4 x 16 GB configuration. It matches the Supermicro H13DSG-O-CPU-D motherboard's required 288-pin RDIMM form factor, 1.1 V voltage and CL40 timing. The modules use 1Rx8 organisation with major OEM chips for enterprise stability.

Who this suits and who should look elsewhere

Server administrators upgrading or populating a Supermicro H13DSG-O-CPU-D system with the exact registered ECC specification the board expects. Builders needing unbuffered UDIMM or SODIMM modules cannot use this kit. Systems requiring different speeds, voltages or capacities must select a validated alternative.

DDR5 4800 registered ECC with 1Rx8 organisation

The DDR5 4800 (PC5-38400) registered ECC design with 1Rx8 rank organisation is the decisive specification. It ensures the memory controller recognises every module at full capacity and rated speed while ECC corrects single-bit errors on the fly. Verify your motherboard manual for supported population rules before purchase.

Najważniejsze cechy

  • 64 GB total capacity from four 16 GB modules for full population
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC architecture corrects single-bit errors and stabilises every slot
  • 1 V operation matches the motherboard memory controller specification
  • Verified fitment for Supermicro H13DSG-O-CPU-D with 288-pin RDIMM form factor

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will these 288-pin DDR5 RDIMMs fit the Supermicro H13DSG-O-CPU-D motherboard slots?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the H13DSG-O-CPU-D requires; it is not a UDIMM or SODIMM and matches the board's physical slot keying.

What is the correct installation order for the four 16 GB modules on this board?

Populate all four slots following the motherboard manual's DIMM population sequence for a 4-module configuration; the kit is spec-matched to those population rules.

Do the modules need active cooling or heat-spreader maintenance over time?

No heat spreader is fitted and none is required; the 1.10 V DDR5 modules run within standard thermal limits, so only occasional dust removal from the server chassis is needed.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.