BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277543BTC
Dostępny
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX EK-2132 memory upgrade
8GB DDR4 3200 SODIMM module with CL22 latency for POSIFLEX EK-2132 kiosk upgrades
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity boosts multitasking headroom on POSIFLEX EK-2132 kiosks
- DDR4 3200 speed delivers responsive operation for retail workloads
- CL22 latency supports stable timing at standard voltage
- 2 V unbuffered design reduces power draw in compact enclosures
- 260-pin SODIMM form factor fits the Mercury Series slot directly
System-specific DDR4 SODIMM for POSIFLEX EK-2132
This 8 GB DDR4 3200 module is built for the POSIFLEX EK-2132 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with unbuffered, non-ECC chips arranged in a 2Rx8 configuration. The stick runs at 1.20 V and carries a CAS latency of 22. It is intended for technicians upgrading or servicing this specific point-of-sale platform.
Verify slot count and maximum supported capacity
Before ordering, confirm the kiosk has a free SODIMM slot and that the system firmware accepts an 8 GB DDR4 3200 module at 1.20 V. Check the service manual for the exact memory population rules and any BIOS revision requirements. The module is not compatible with desktop DIMM slots or systems that require registered or ECC memory.
Low-voltage operation keeps thermals modest
At 1.20 V the module draws minimal power during typical kiosk workloads, so it adds little heat inside the compact chassis. No heat spreader is fitted, relying on the system's existing airflow. Acoustic impact is negligible because the component has no moving parts. The 2Rx8 organisation supports stable throughput at the rated 3200 MT/s speed.
Najważniejsze cechy
- 8 GB capacity boosts multitasking headroom on POSIFLEX EK-2132 kiosks
- DDR4 3200 speed delivers responsive operation for retail workloads
- CL22 latency supports stable timing at standard voltage
- 2 V unbuffered design reduces power draw in compact enclosures
- 260-pin SODIMM form factor fits the Mercury Series slot directly
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Pytania dotyczące tego produktu
Does the module ship alone or with any extra parts or tools?
The package contains a single 8GB DDR4 3200 CL22 2Rx8 260-pin SODIMM; no additional components, cables or tools are included.
Which version should I pick if my POSIFLEX EK-2132 kiosk needs a single 8GB stick at 3200 MHz?
Choose the MS25600-828K1 module — it is an 8GB 1Rx8 DDR4 3200 PC4-25600 CL22 1.2V unbuffered SODIMM validated for that system.
What does the 3200 MT/s rating mean once the SODIMM is installed in the EK-2132?
The memory will run at 3200 MT/s with CL22 latency at 1.2V, delivering the rated PC4-25600 bandwidth for the kiosk's DDR4 slot.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280124BTC
Dostępny
