我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX EK-2132 memory upgrade

SKU CH-GEDF-1RFVS

8GB DDR4 3200 SODIMM module with CL22 latency for POSIFLEX EK-2132 kiosk upgrades

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity boosts multitasking headroom on POSIFLEX EK-2132 kiosks
  • DDR4 3200 speed delivers responsive operation for retail workloads
  • CL22 latency supports stable timing at standard voltage
  • 2 V unbuffered design reduces power draw in compact enclosures
  • 260-pin SODIMM form factor fits the Mercury Series slot directly

System-specific DDR4 SODIMM for POSIFLEX EK-2132

This 8 GB DDR4 3200 module is built for the POSIFLEX EK-2132 Mercury Series kiosk. It uses a 260-pin SODIMM form factor with unbuffered, non-ECC chips arranged in a 2Rx8 configuration. The stick runs at 1.20 V and carries a CAS latency of 22. It is intended for technicians upgrading or servicing this specific point-of-sale platform.

Verify slot count and maximum supported capacity

Before ordering, confirm the kiosk has a free SODIMM slot and that the system firmware accepts an 8 GB DDR4 3200 module at 1.20 V. Check the service manual for the exact memory population rules and any BIOS revision requirements. The module is not compatible with desktop DIMM slots or systems that require registered or ECC memory.

Low-voltage operation keeps thermals modest

At 1.20 V the module draws minimal power during typical kiosk workloads, so it adds little heat inside the compact chassis. No heat spreader is fitted, relying on the system's existing airflow. Acoustic impact is negligible because the component has no moving parts. The 2Rx8 organisation supports stable throughput at the rated 3200 MT/s speed.

商品特色

  • 8 GB capacity boosts multitasking headroom on POSIFLEX EK-2132 kiosks
  • DDR4 3200 speed delivers responsive operation for retail workloads
  • CL22 latency supports stable timing at standard voltage
  • 2 V unbuffered design reduces power draw in compact enclosures
  • 260-pin SODIMM form factor fits the Mercury Series slot directly

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Does the module ship alone or with any extra parts or tools?

The package contains a single 8GB DDR4 3200 CL22 2Rx8 260-pin SODIMM; no additional components, cables or tools are included.

Which version should I pick if my POSIFLEX EK-2132 kiosk needs a single 8GB stick at 3200 MHz?

Choose the MS25600-828K1 module — it is an 8GB 1Rx8 DDR4 3200 PC4-25600 CL22 1.2V unbuffered SODIMM validated for that system.

What does the 3200 MT/s rating mean once the SODIMM is installed in the EK-2132?

The memory will run at 3200 MT/s with CL22 latency at 1.2V, delivering the rated PC4-25600 bandwidth for the kiosk's DDR4 slot.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。