Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1.1V 262-PIN SODIMM memory upgrade

SKU CH-PETW-WB80H

An 8 GB DDR5 SODIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X14SPN-H systems

  • Capacity8GB
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • 8GB capacity lifts multitasking headroom for demanding workloads
  • DDR5 5600MHz speed delivers high data throughput for responsive performance
  • CL46 latency and 1.1V operation match the memory controller's exact timing and power requirements
  • 262-pin SODIMM form factor fits the Supermicro X14SPN-H motherboard slot precisely
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specifications

Exact DDR5 SODIMM upgrade

This 8 GB DDR5-5600 module uses the 262-pin SODIMM form factor and runs at 1.1 V with CL46 timing. It is built with major OEM chips and tested for stability at the rated speed. The unbuffered, non-ECC design matches the memory controller requirements of compatible Supermicro systems.

Fits Supermicro X14SPN-H motherboard

The module installs directly into the board's SODIMM slots without adapters or voltage changes. Its 1Rx8 rank organisation follows the platform's population rules so the full capacity is recognised at the rated 5600 MT/s. No heat spreader is fitted, leaving clearance for tight laptop or compact chassis layouts.

Replaces slower or smaller DDR5 SODIMMs

Upgrading from lower-frequency DDR5 or lower-capacity modules restores the bandwidth the platform was designed for. The jump is worth it when the current memory limits multitasking throughput or forces the system to run below the native 5600 MT/s data rate. Buyers needing ECC, registered DIMMs or desktop UDIMM form factors should look elsewhere.

Najważniejsze cechy

  • 8GB capacity lifts multitasking headroom for demanding workloads
  • DDR5 5600MHz speed delivers high data throughput for responsive performance
  • CL46 latency and 1.1V operation match the memory controller's exact timing and power requirements
  • 262-pin SODIMM form factor fits the Supermicro X14SPN-H motherboard slot precisely
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specifications

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-818K1
Capacity8GB
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How much power does the 1.1V DDR5 SODIMM draw under sustained load?

The module runs at 1.10V; DDR5 moves voltage regulation onto the stick, so sustained draw stays at the rated 1.10V level set by the memory controller.

Does the CL46 5600MHz stick run hot or loud during all-day operation?

No heat spreader is fitted and the module is unbuffered, so it relies on chassis airflow; it produces no noise and typical DDR5 SODIMM temperatures under load.

What must my Supermicro X14SPN-H already have to accept this 262-pin upgrade?

An available DDR5 SODIMM slot that supports 1Rx8 Non-ECC unbuffered modules at 5600MHz and 1.10V, per the board's memory-population rules.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.