NEMIX RAM 8GB DDR5 5600 CL46 1Rx8 1.1V 262-Pin SODIMM Memory Upgrade
- 8GB
- 262-Pin DDR5 SODIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
An 8 GB DDR5 SODIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X14SPN-H systems
Size 8GB
This 8 GB DDR5-5600 module uses the 262-pin SODIMM form factor and runs at 1.1 V with CL46 timing. It is built with major OEM chips and tested for stability at the rated speed. The unbuffered, non-ECC design matches the memory controller requirements of compatible Supermicro systems.
The module installs directly into the board's SODIMM slots without adapters or voltage changes. Its 1Rx8 rank organisation follows the platform's population rules so the full capacity is recognised at the rated 5600 MT/s. No heat spreader is fitted, leaving clearance for tight laptop or compact chassis layouts.
Upgrading from lower-frequency DDR5 or lower-capacity modules restores the bandwidth the platform was designed for. The jump is worth it when the current memory limits multitasking throughput or forces the system to run below the native 5600 MT/s data rate. Buyers needing ECC, registered DIMMs or desktop UDIMM form factors should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-818K1 |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SODIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module runs at 1.10V; DDR5 moves voltage regulation onto the stick, so sustained draw stays at the rated 1.10V level set by the memory controller.
No heat spreader is fitted and the module is unbuffered, so it relies on chassis airflow; it produces no noise and typical DDR5 SODIMM temperatures under load.
An available DDR5 SODIMM slot that supports 1Rx8 Non-ECC unbuffered modules at 5600MHz and 1.10V, per the board's memory-population rules.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?