We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM modules, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 2Rx8 1.1V 262-pin SODIMM memory upgrade for Supermicro X14SAV-F

SKU CH-6CFC-WSVCP

A 96 GB kit of two 48 GB DDR5 5600 SODIMM modules with CL46 timing and 1.1 V operation, built with major OEM chips for the Supermicro X14SAV-F motherboard

  • Capacity96GB (2 x 48GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96GB kit doubles capacity for demanding workloads using two 48GB modules
  • DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
  • CL46 latency and 1.1V operation match the platform's native timing and power profile
  • 2Rx8 dual-rank organisation maximises density per SODIMM slot
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specifications

Exact-match DDR5 SODIMM kit

This NEMIX RAM kit delivers 96 GB of DDR5 memory in two 48 GB modules. It is built as a direct upgrade for the Supermicro X14SAV-F motherboard and uses the 262-pin SODIMM form factor required by that platform.

Dual-rank 2Rx8 at CL46

Each module runs at 5600 MT/s with a CAS latency of 46 and a voltage of 1.1 V. The 2Rx8 organisation matches the memory controller expectations so the system recognises the full capacity and operates at the rated speed.

Suited for Supermicro X14SAV-F owners

Builders upgrading that specific board get verified fitment and tested stability. Buyers with a different motherboard or a system that requires ECC or registered DIMMs should look elsewhere.

Highlights

  • 96GB kit doubles capacity for demanding workloads using two 48GB modules
  • DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
  • CL46 latency and 1.1V operation match the platform's native timing and power profile
  • 2Rx8 dual-rank organisation maximises density per SODIMM slot
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specifications

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-4828K2
Capacity96GB (2 x 48GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 5600 MT/s rating mean once the kit is installed in the Supermicro X14SAV-F?

The kit runs at DDR5-5600 (PC5-44800) with CL46 timing and 1.10 V, so the memory controller recognises both 48 GB modules at full capacity and operates them at the rated speed without manual tuning.

How does the 262-pin SODIMM form factor limit the upgrade?

The 262-pin DDR5 SODIMM layout is the only physical interface the board accepts; desktop UDIMMs will not fit, and the unbuffered, non-ECC design matches the platform's memory population rules exactly.

What clearance or mounting details should I check before fitting the two modules?

Each module is a standard 262-pin SODIMM with no heat spreader, so it fits the motherboard's SO-DIMM slots directly; verify the manual for approved slot order and maximum supported capacity per slot before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.