We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, 262 gold edge contacts, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1Rx8 1.1V 262-PIN SODIMM Supermicro X14SAV-F memory upgrade

SKU CH-SAE4-EHXPB

8GB DDR5 5600MHz SODIMM with CL46 timing and 1.1V operation, verified for Supermicro X14SAV-F motherboards

  • Capacity8GB
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact-match upgrade for Supermicro X14SAV-F with DDR5 5600 CL46 timing
  • 8 GB DDR5 SODIMM at 1.1 V runs at rated PC5-44800 speed
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 262-pin unbuffered form factor fits the required laptop slot
  • Lifetime replacement warranty with US-based technical support included

Exact-Match DDR5 SODIMM

This 8 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.10 V. It is built as a 1Rx8 unbuffered SODIMM using major OEM chips and carries the PC5-44800 designation. The 262-pin form factor matches the Supermicro X14SAV-F motherboard specification.

Build Integration

The module plugs directly into the board's DDR5 SODIMM slots without adapters or voltage changes. Its exact rank, timing and voltage profile mean the memory controller recognises it at full capacity and rated speed. No heat spreader is fitted, so clearance around the slot remains unchanged.

Target Buyer

Suits owners of the Supermicro X14SAV-F who need a single 8 GB DDR5 upgrade that matches the factory spec. Builders requiring ECC, registered DIMMs, higher capacities per slot or desktop UDIMM form factors should look elsewhere.

Highlights

  • Exact-match upgrade for Supermicro X14SAV-F with DDR5 5600 CL46 timing
  • 8 GB DDR5 SODIMM at 1.1 V runs at rated PC5-44800 speed
  • Built with major OEM chips from Samsung, Micron or Hynix
  • 262-pin unbuffered form factor fits the required laptop slot
  • Lifetime replacement warranty with US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-818K1
Capacity8GB
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.1V operating voltage limit sustained performance under heavy load?

The module runs at the standard 1.1V for DDR5 5600 SODIMM. It draws power within the laptop controller's design envelope, so voltage is not a throttle point during extended use.

How much heat does the module generate when running all day without a heat spreader?

With no heat spreader and a low 1.1V supply, the 8GB SODIMM produces modest heat that the laptop's existing airflow handles. Typical SODIMM temperatures stay well within JEDEC limits during continuous operation.

Does my Supermicro X14SAV-F need a specific BIOS version or populated slot order to recognise this 8GB 1Rx8 SODIMM?

The board requires DDR5 5600 SODIMM in the correct slot sequence. Check the system manual for the approved population order and any minimum BIOS revision before installing the 262-pin module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.