Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green bare circuit board DDR5 RDIMM module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-H7AH-4B8KP

96 GB DDR5 4800 CL40 2Rx4 ECC registered RDIMM for Supermicro H13SSW servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Pokaż jeszcze 24 konfiguracji
  • 96 GB DDR5-4800 registered ECC DIMM matches Supermicro H13SSW memory-controller specs for full-capacity recognition
  • 2Rx4 rank and 1.1 V operation align with board population rules so every slot runs at rated speed
  • Registered architecture offloads the controller while ECC corrects single-bit errors to prevent silent data corruption
  • CL40 latency and PC5-38400 bandwidth deliver stable throughput for enterprise workloads
  • 288-pin RDIMM form factor fits the H13SSW DIMM slots exactly — no UDIMM or SODIMM mismatch

Exact-fit 96 GB DDR5 server upgrade

This 96 GB DDR5-4800 registered ECC module is built for the Supermicro H13SSW motherboard. It arrives as a single 288-pin RDIMM rated at 1.1 V with CL40 timings. The 2Rx4 organization matches the board's memory-controller requirements for full-capacity recognition.

Registered ECC with 2Rx4 rank

The registered architecture buffers address and command signals so every slot can be populated without loading the memory controller. On-die ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. The 2Rx4 rank layout is the specific configuration the H13SSW expects for stable operation at rated speed.

Populates one DDR5 RDIMM slot

Install this module into an available 288-pin DDR5 RDIMM slot on the H13SSW following the motherboard's population sequence. No heat spreader is fitted, leaving maximum clearance for dense server chassis airflow. Verify the manual for approved DIMM order and maximum supported capacity per channel before adding further modules.

Najważniejsze cechy

  • 96 GB DDR5-4800 registered ECC DIMM matches Supermicro H13SSW memory-controller specs for full-capacity recognition
  • 2Rx4 rank and 1.1 V operation align with board population rules so every slot runs at rated speed
  • Registered architecture offloads the controller while ECC corrects single-bit errors to prevent silent data corruption
  • CL40 latency and PC5-38400 bandwidth deliver stable throughput for enterprise workloads
  • 288-pin RDIMM form factor fits the H13SSW DIMM slots exactly — no UDIMM or SODIMM mismatch

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 4800 MT/s speed run at full rate on a Supermicro H13SSW?

The module is spec-matched to the board's memory controller, so it initialises at DDR5-4800 with CL40 timing and 1.10 V without manual tuning.

What does the 288-pin RDIMM form factor limit for this motherboard?

The H13SSW only accepts registered 288-pin DDR5 RDIMMs; UDIMM or SODIMM modules will not seat or function.

Does the 2Rx4 rank layout fit the H13SSW's slot population rules?

The dual-rank x4 organisation matches the board's approved DIMM population order for full-capacity operation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.