Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green circuit boards with black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 16GB 2x8GB CL40 1.1V SODIMM memory upgrade for Supermicro X13SRN-E

SKU CH-HY9G-BB2B1

A 16 GB DDR5 SODIMM kit (2 × 8 GB) running at 4800 MHz CL40 1.1 V, validated for the Supermicro X13SRN-E motherboard

  • Capacity16GB (2 x 8GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit lifts multitasking headroom
  • DDR5 4800 speed matches the Supermicro X13SRN-E memory controller
  • CL40 1.10 V timing runs at rated frequency without manual tuning
  • 262-pin SODIMM form factor fits the laptop slot exactly
  • Major OEM Samsung Micron Hynix chips validated for stability

Supermicro X13SRN-E DDR5 upgrade

This 16 GB kit contains two 8 GB DDR5 SODIMM modules built for the Supermicro X13SRN-E motherboard. The 262-pin unbuffered form factor matches the board's slots exactly. Each module runs at 4800 MHz with CL40 latency at 1.1 V. Major OEM chips from Samsung, Micron or Hynix provide tested stability.

Exact-match specification changes

The kit matches the precise rank, voltage and timing the memory controller expects so the system recognises full capacity at rated speed. Verified fitment eliminates the guesswork of generic modules that may not populate correctly. Lifetime replacement warranty and free US-based technical support back the upgrade.

DDR5 4800 SODIMM form factor

The 262-pin SODIMM layout is the single specification that decides compatibility; desktop UDIMMs will not fit. Buyers needing ECC or registered memory must choose a different product. Consult the system manual for supported capacities and population order before purchase.

Najważniejsze cechy

  • 16 GB dual-channel kit lifts multitasking headroom
  • DDR5 4800 speed matches the Supermicro X13SRN-E memory controller
  • CL40 1.10 V timing runs at rated frequency without manual tuning
  • 262-pin SODIMM form factor fits the laptop slot exactly
  • Major OEM Samsung Micron Hynix chips validated for stability

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-818K2
Capacity16GB (2 x 8GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Will the 1Rx8 rank configuration on these 8 GB modules require any future replacement if I expand to the board's maximum capacity?

The kit uses 1Rx8 organization on each 8 GB SODIMM, so adding more modules later simply means filling remaining slots with the same rank layout — no replacement of the original pair is needed.

What limit appears first when the memory runs continuously at DDR5 4800?

Sustained operation at 4800 MT/s is constrained by the CL40 latency and 1.10 V voltage the controller expects; exceeding either timing or voltage threshold causes instability before thermal limits become an issue.

How much heat and power do the two SODIMMs draw when the system runs all day?

Each module operates at 1.10 V without a heat spreader, so total power stays low and passive airflow in the chassis is sufficient — no active cooling or extra noise is introduced.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.