Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with gold contacts and black memory chips no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 32GB ECC RDIMM 2Rx8 CL40 Supermicro H13SST-G memory upgrade

SKU CH-0R7G-3W66C

32 GB DDR5 4800 MHz ECC registered RDIMM with CL40 latency and 1.1 V operation, validated for the Supermicro H13SST-G motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Pokaż jeszcze 24 konfiguracji
  • Exact-match DDR5-4800 32GB ECC RDIMM installs at rated speed
  • Registered 2Rx8 architecture enables full-capacity population across all slots
  • On-die ECC corrects single-bit errors to prevent silent data corruption
  • 1V DDR5 voltage reduces power draw versus previous generations
  • 288-pin RDIMM form factor fits Supermicro H13SST-G motherboard slots

Exact-match 32 GB DDR5 RDIMM

This NEMIX RAM module is a 32 GB DDR5 4800 registered ECC RDIMM built to the 2Rx8 CL40 1.10 V specification. It plugs into a 288-pin slot and matches the memory controller expectations of the Supermicro H13SST-G motherboard so the server recognises full capacity at rated speed.

Suited for populated Supermicro H13SST-G servers

The registered design offloads the memory controller allowing every slot to run fully populated while ECC corrects single-bit errors on the fly. Builders who need unbuffered UDIMMs or laptop SODIMMs should look at something else because this module uses the 288-pin RDIMM form factor only.

2Rx8 CL40 1.10 V DDR5 4800 specification

The single specification that decides fitment is the 2Rx8 CL40 1.10 V DDR5 4800 registered ECC profile. Your system manual must list this exact rank voltage and timing combination for the module to be recognised at full capacity and rated speed.

Najważniejsze cechy

  • Exact-match DDR5-4800 32GB ECC RDIMM installs at rated speed
  • Registered 2Rx8 architecture enables full-capacity population across all slots
  • On-die ECC corrects single-bit errors to prevent silent data corruption
  • 1V DDR5 voltage reduces power draw versus previous generations
  • 288-pin RDIMM form factor fits Supermicro H13SST-G motherboard slots

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I install the 288-pin RDIMM in the Supermicro H13SST-G, and which slot order does the manual require?

Align the module's key notch with the slot, press straight down until both side clips lock, then follow the board's DIMM population sequence shown in the motherboard manual to ensure the 2Rx8 registered ECC kit is recognised at 4800 MT/s.

What maintenance will this 32 GB DDR5 ECC RDIMM need over its service life?

No scheduled maintenance is required; the registered ECC design corrects single-bit errors on the fly, and the module has no heat spreader or moving parts to service.

What limit appears first when the RDIMM runs fully populated at 4800 MT/s under sustained load?

The memory controller's maximum supported capacity and population rules become the limiting factor before the CL40 1.10 V modules reach any thermal or electrical ceiling.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.