Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Sixteen green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 256GB 16x16GB CL40 1.1V Supermicro H14DSG-OD memory upgrade

SKU CH-Q3H3-M59SE

A 256 GB DDR5 ECC registered kit of sixteen 16 GB modules running at 4800 MHz CL40 1.1 V, validated for the Supermicro H14DSG-OD motherboard

  • Capacity256GB (16 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 16X16GB

Pokaż jeszcze 30 konfiguracji
  • 256 GB kit fills every slot for maximum capacity
  • Registered ECC design corrects single-bit errors to protect data integrity
  • DDR5 4800 CL40 at 1.1 V matches the board's native timing
  • 16 × 16 GB 1Rx8 modules populate all channels for full bandwidth
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD exactly

Exact DDR5-4800 RDIMM kit

This 256GB kit contains 16 modules of 16GB each, built as DDR5-4800 PC5-38400 Registered ECC RDIMMs with CL40 timing at 1.1V. The 1Rx8 organisation and 288-pin form factor match the Supermicro H14DSG-OD motherboard requirements for full-capacity population.

Suited for H14DSG-OD memory expansion

Ideal for administrators who need to maximise the supported memory on this specific Supermicro platform with validated Registered ECC modules. Not for systems that accept only UDIMM or SODIMM form factors, or for builds requiring speeds above DDR5-4800.

DDR5-4800 Registered ECC specification

The DDR5-4800 Registered ECC RDIMM standard with 1Rx8 rank and 1.1V operation determines whether the memory controller recognises every module at rated speed. Verify the motherboard manual for approved population order before installation.

Najważniejsze cechy

  • 256 GB kit fills every slot for maximum capacity
  • Registered ECC design corrects single-bit errors to protect data integrity
  • DDR5 4800 CL40 at 1.1 V matches the board's native timing
  • 16 × 16 GB 1Rx8 modules populate all channels for full bandwidth
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K16
Capacity256GB (16 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 16X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I install the 16 DDR5 RDIMM modules in the Supermicro H14DSG-OD, and which step is most often missed?

Power off the server, open the chassis, and insert each 288-pin module into the slots listed in the motherboard manual's population table; the step most often missed is following the exact slot order so the memory controller recognises all 256GB at DDR5-4800.

What maintenance or replacement will the 1Rx8 ECC registered kit need during its service life?

The modules have no heat spreaders or moving parts, so no routine maintenance is required; replacement is only needed if a DIMM fails, which the lifetime warranty covers with a direct swap of the faulty 16GB stick.

What limit appears first when the 256GB kit runs sustained workloads at CL40 1.10V?

The registered buffer and ECC logic keep signal integrity at full population, so the first limit is the DDR5-4800 data rate and CL40 latency ceiling set by the memory controller — thermals stay within spec because each 1Rx8 module draws only 1.1V.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.