Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 256GB (8x32GB) CL40 1.1V 2Rx8 Supermicro H13DSG-O-CPU memory upgrade

SKU CH-6WAA-Q3TQ7

256 GB DDR5 server kit with eight 32 GB registered ECC modules at 4800 MHz, CL40 and 1.1 V for the Supermicro H13DSG-O-CPU motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Pokaż jeszcze 30 konfiguracji
  • 256 GB capacity from eight 32 GB modules for dense server workloads
  • DDR5 4800 speed delivers PC5-38400 bandwidth for high-throughput applications
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 1 V operation at CL40 matches the motherboard's exact timing requirements
  • 288-pin RDIMM form factor ensures verified fitment in Supermicro H13DSG-O-CPU systems

256GB DDR5-4800 ECC RDIMM Kit

This kit delivers 256GB of DDR5-4800 registered ECC memory in eight 32GB modules. It is built for the Supermicro H13DSG-O-CPU motherboard and matches the exact rank, voltage, and timing the memory controller expects. Each 288-pin RDIMM runs at 1.1V with CL40 latency and 2Rx8 organization. The registered buffer lets every slot run fully populated at rated speed.

Server builds needing maximum capacity per slot

Administrators upgrading a Supermicro H13DSG-O-CPU platform to its full memory limit will use this exact-match kit. Workstations that require unbuffered UDIMMs or SODIMM form factors cannot accept these registered RDIMMs. Systems limited to lower densities per DIMM or a different DDR generation should look elsewhere.

DDR5-4800 2Rx8 Registered ECC spec

The DDR5-4800 (PC5-38400) 2Rx8 registered ECC specification at 1.1V and CL40 decides compatibility. The motherboard must support this speed, rank, voltage, latency, and registered buffering for the kit to be recognized at full capacity and run at its rated frequency.

Najważniejsze cechy

  • 256 GB capacity from eight 32 GB modules for dense server workloads
  • DDR5 4800 speed delivers PC5-38400 bandwidth for high-throughput applications
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 1 V operation at CL40 matches the motherboard's exact timing requirements
  • 288-pin RDIMM form factor ensures verified fitment in Supermicro H13DSG-O-CPU systems

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does DDR5 4800 (PC5-38400) run at its rated speed on the Supermicro H13DSG-O-CPU?

Yes, the kit is spec-matched to the board's memory controller so all 256GB are recognized and run at DDR5 4800 with CL40 timings.

What physical slot and form factor does this 288-pin RDIMM kit require?

The modules are 288-pin Registered RDIMMs; they only fit DDR5 RDIMM slots on the Supermicro H13DSG-O-CPU and will not work in UDIMM or SODIMM sockets.

How do I install the 8x32GB kit in the correct population order?

Consult the Supermicro H13DSG-O-CPU manual for the approved DIMM population sequence, then seat each 32GB RDIMM firmly until the ejector clips click.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.