NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 128GB (4x32GB) CL46 1.1V 2Rx8 Supermicro H13SSH
128 GB DDR5 5600 ECC RDIMM kit in four 32 GB modules at 1.1 V CL46, built for Supermicro H13SSH servers
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128 GB capacity from four 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- ECC and registered design corrects errors and stabilises full population
- CL46 latency at 1.1 V operating voltage
- Verified compatible with Supermicro H13SSH motherboard
Exact-match DDR5 kit for Supermicro H13SSH
This 128GB kit contains four 32GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the H13SSH memory controller expects. Each module is a 2Rx8 registered ECC DIMM running at 1.1V with CL46 latency. The kit is designed so the board recognises the full capacity and operates at the rated 5600 MT/s speed.
DDR5 5600 registered ECC limits
DDR5 5600 sets the maximum data rate at 5600 MT/s and the standard voltage at 1.1V for this registered ECC implementation. The registered buffer reduces electrical load on the memory controller, allowing all four slots to be populated at full capacity, while ECC corrects single-bit errors on the fly. The board's own population rules and maximum supported capacity per slot remain the governing constraints.
Four-slot installation on H13SSH
Installing the kit means seating all four 288-pin RDIMMs in the order the Supermicro H13SSH manual specifies for a four-module configuration. Common issues arise when modules are placed in the wrong slots, when the BIOS is not updated to the version that supports the full 128GB population, or when a UDIMM or SODIMM is mistakenly used instead of the required registered form factor.
Najważniejsze cechy
- 128 GB capacity from four 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- ECC and registered design corrects errors and stabilises full population
- CL46 latency at 1.1 V operating voltage
- Verified compatible with Supermicro H13SSH motherboard
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Pytania dotyczące tego produktu
Should I choose the 128GB kit with four 32GB modules or a different capacity for my Supermicro H13SSH?
This exact-match kit provides 128GB total using four 32GB DDR5-5600 RDIMMs. Populate all four slots following the motherboard manual's population order to run at full rated speed and capacity.
What does DDR5-5600 CL46 actually deliver once installed in the H13SSH?
The modules operate at 5600 MT/s with CAS latency 46 at 1.1V. Registered ECC architecture lets the memory controller run every slot fully populated at that speed while correcting single-bit errors on the fly.
How does the 288-pin RDIMM interface and PC5-44800 rating limit real-world performance?
The 288-pin RDIMM form factor is required by the H13SSH; UDIMM or SODIMM will not fit. PC5-44800 confirms the 5600 MT/s data rate, so bandwidth is capped at that DDR5-5600 specification.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00132964BTC
Dostępny
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010119BTC
Dostępny