我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules with black chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 128GB (4x32GB) CL46 1.1V 2Rx8 Supermicro H13SSH

SKU CH-F85C-DFPF6

128 GB DDR5 5600 ECC RDIMM kit in four 32 GB modules at 1.1 V CL46, built for Supermicro H13SSH servers

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity from four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC and registered design corrects errors and stabilises full population
  • CL46 latency at 1.1 V operating voltage
  • Verified compatible with Supermicro H13SSH motherboard

Exact-match DDR5 kit for Supermicro H13SSH

This 128GB kit contains four 32GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the H13SSH memory controller expects. Each module is a 2Rx8 registered ECC DIMM running at 1.1V with CL46 latency. The kit is designed so the board recognises the full capacity and operates at the rated 5600 MT/s speed.

DDR5 5600 registered ECC limits

DDR5 5600 sets the maximum data rate at 5600 MT/s and the standard voltage at 1.1V for this registered ECC implementation. The registered buffer reduces electrical load on the memory controller, allowing all four slots to be populated at full capacity, while ECC corrects single-bit errors on the fly. The board's own population rules and maximum supported capacity per slot remain the governing constraints.

Four-slot installation on H13SSH

Installing the kit means seating all four 288-pin RDIMMs in the order the Supermicro H13SSH manual specifies for a four-module configuration. Common issues arise when modules are placed in the wrong slots, when the BIOS is not updated to the version that supports the full 128GB population, or when a UDIMM or SODIMM is mistakenly used instead of the required registered form factor.

商品特色

  • 128 GB capacity from four 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC and registered design corrects errors and stabilises full population
  • CL46 latency at 1.1 V operating voltage
  • Verified compatible with Supermicro H13SSH motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

Should I choose the 128GB kit with four 32GB modules or a different capacity for my Supermicro H13SSH?

This exact-match kit provides 128GB total using four 32GB DDR5-5600 RDIMMs. Populate all four slots following the motherboard manual's population order to run at full rated speed and capacity.

What does DDR5-5600 CL46 actually deliver once installed in the H13SSH?

The modules operate at 5600 MT/s with CAS latency 46 at 1.1V. Registered ECC architecture lets the memory controller run every slot fully populated at that speed while correcting single-bit errors on the fly.

How does the 288-pin RDIMM interface and PC5-44800 rating limit real-world performance?

The 288-pin RDIMM form factor is required by the H13SSH; UDIMM or SODIMM will not fit. PC5-44800 confirms the 5600 MT/s data rate, so bandwidth is capped at that DDR5-5600 specification.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。