NEMIX RAM
NEMIX RAM DDR5 5600 ECC Registered RDIMM 192GB (12x16GB) 1Rx8 CL46 1.1V Supermicro H13SSF memory upgrade
A 192 GB DDR5 registered ECC kit of twelve 16 GB modules running at 5600 MT/s with CL46 latency and 1.1 V, built for the Supermicro H13SSF motherboard
- Capacity192GB (12 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192GB kit fills every slot at rated DDR5-5600 speed
- Registered ECC design catches single-bit errors before they corrupt data
- 1V operation matches the Supermicro H13SSF memory controller exactly
- 12x16GB 1Rx8 modules follow the board's population rules
- CL46 timing keeps latency predictable under full load
192 GB DDR5 ECC RDIMM kit for Supermicro H13SSF
This 192 GB kit contains twelve 16 GB DDR5 5600 RDIMM modules built for the Supermicro H13SSF motherboard. Each module is a 288-pin registered ECC DIMM running at 1.1 V with CL46 latency. The registered design lets the board run every slot populated at the rated speed.
Suited for admins expanding H13SSF capacity to 192
Server operators who need the exact rank, voltage and timing the H13SSF memory controller expects will get plug-and-play recognition. Builders using consumer UDIMMs, SODIMMs, or non-ECC memory should look elsewhere because the board requires registered ECC RDIMMs. Systems that cannot accept twelve DIMMs or that demand a different voltage or latency will not support this kit.
Registered ECC RDIMM with 1Rx8 organisation
The single-rank 1Rx8 organisation combined with registered buffering and on-die ECC is the specification that decides compatibility. It matches the H13SSF population rules so all twelve slots operate at DDR5 5600 without downclocking. If your platform requires dual-rank modules, unbuffered DIMMs, or a different CAS latency this kit will not work.
Najważniejsze cechy
- 192GB kit fills every slot at rated DDR5-5600 speed
- Registered ECC design catches single-bit errors before they corrupt data
- 1V operation matches the Supermicro H13SSF memory controller exactly
- 12x16GB 1Rx8 modules follow the board's population rules
- CL46 timing keeps latency predictable under full load
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K12 |
| Capacity | 192GB (12 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 12X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Pytania dotyczące tego produktu
Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H13SSF motherboard slots?
Yes, the kit uses 288-pin DDR5 RDIMM modules, which is the exact form factor required by the Supermicro H13SSF motherboard.
What is the correct installation order for the 12 modules in the Supermicro H13SSF?
Install the 12 modules following the motherboard manual's DIMM population sequence; the kit is spec-matched to the board's rules but the manual defines the exact slot order.
Will the 1.1V operating voltage of these modules require any future adjustment or replacement?
The modules run at the standard 1.1V for DDR5 and are covered by a lifetime replacement warranty if any module fails.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00133543BTC
Dostępny
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010163BTC
Dostępny