We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 192GB (12x16GB) 1Rx8 CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-SVSB-4F8P1

A 192 GB DDR5 registered ECC kit of twelve 16 GB modules running at 5600 MT/s with CL46 latency and 1.1 V, built for the Supermicro H13SSF motherboard

  • Capacity192GB (12 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192GB kit fills every slot at rated DDR5-5600 speed
  • Registered ECC design catches single-bit errors before they corrupt data
  • 1V operation matches the Supermicro H13SSF memory controller exactly
  • 12x16GB 1Rx8 modules follow the board's population rules
  • CL46 timing keeps latency predictable under full load

192 GB DDR5 ECC RDIMM kit for Supermicro H13SSF

This 192 GB kit contains twelve 16 GB DDR5 5600 RDIMM modules built for the Supermicro H13SSF motherboard. Each module is a 288-pin registered ECC DIMM running at 1.1 V with CL46 latency. The registered design lets the board run every slot populated at the rated speed.

Suited for admins expanding H13SSF capacity to 192

Server operators who need the exact rank, voltage and timing the H13SSF memory controller expects will get plug-and-play recognition. Builders using consumer UDIMMs, SODIMMs, or non-ECC memory should look elsewhere because the board requires registered ECC RDIMMs. Systems that cannot accept twelve DIMMs or that demand a different voltage or latency will not support this kit.

Registered ECC RDIMM with 1Rx8 organisation

The single-rank 1Rx8 organisation combined with registered buffering and on-die ECC is the specification that decides compatibility. It matches the H13SSF population rules so all twelve slots operate at DDR5 5600 without downclocking. If your platform requires dual-rank modules, unbuffered DIMMs, or a different CAS latency this kit will not work.

Highlights

  • 192GB kit fills every slot at rated DDR5-5600 speed
  • Registered ECC design catches single-bit errors before they corrupt data
  • 1V operation matches the Supermicro H13SSF memory controller exactly
  • 12x16GB 1Rx8 modules follow the board's population rules
  • CL46 timing keeps latency predictable under full load

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K12
Capacity192GB (12 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 12X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H13SSF motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules, which is the exact form factor required by the Supermicro H13SSF motherboard.

What is the correct installation order for the 12 modules in the Supermicro H13SSF?

Install the 12 modules following the motherboard manual's DIMM population sequence; the kit is spec-matched to the board's rules but the manual defines the exact slot order.

Will the 1.1V operating voltage of these modules require any future adjustment or replacement?

The modules run at the standard 1.1V for DDR5 and are covered by a lifetime replacement warranty if any module fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.