Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Sixteen green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 768GB 16x48GB 4800MHz CL40 2Rx8 1.1V ECC RDIMM Supermicro H13SSF

SKU CH-C4FW-JBDE0

A 768 GB DDR5 registered ECC server memory kit of sixteen 48 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13SSF motherboard

  • Capacity768GB (16 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 16X48GB

Pokaż jeszcze 30 konfiguracji
  • 768 GB total capacity from sixteen 48 GB modules
  • DDR5 4800 MHz speed with CL40 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation matches the Supermicro H13SSF memory controller spec
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Exact-Match Server Upgrade

This NEMIX RAM kit delivers 768GB of DDR5 memory across 16 modules of 48GB each, built to the precise specifications the Supermicro H13SSF motherboard expects. Registered ECC RDIMM architecture with 2Rx8 organisation, 1.10V operation and CL40 timing ensures the memory controller recognises full capacity at the rated 4800MHz speed without manual tuning.

Registered ECC Stability

Each 288-pin RDIMM uses major-brand Samsung, Micron or Hynix ICs without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so all 16 slots can run fully populated, while on-die ECC corrects single-bit errors in flight to prevent silent data corruption and unexpected reboots in production workloads.

Population-Rule Dependent

The kit replaces or expands existing memory only when the motherboard manual confirms support for 16 x 48GB 2Rx8 Registered DIMMs at DDR5-4800; boards limited to fewer ranks, lower densities or UDIMM slots cannot use this configuration. Verify the approved DIMM population order and maximum supported capacity in your system documentation before purchase.

Najważniejsze cechy

  • 768 GB total capacity from sixteen 48 GB modules
  • DDR5 4800 MHz speed with CL40 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 1 V operation matches the Supermicro H13SSF memory controller spec
  • 288-pin RDIMM form factor fits the board's DIMM slots exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K16
Capacity768GB (16 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 16X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What DDR5 speed and CAS latency does this 16x48GB kit run at on the Supermicro H13SSF?

The kit is rated for DDR5 4800 (PC5-38400) with CL40 latency, so the memory controller will recognise all 768GB at that speed and timing.

What physical slot type and form factor are required to install these 48GB modules?

Each module is a 288-pin Registered RDIMM; the board must provide DDR5 RDIMM slots, not UDIMM or SODIMM sockets.

In what order should the 16 RDIMMs be populated on the H13SSF to avoid a no-post condition?

Follow the motherboard manual's approved DIMM population sequence for 16 modules; skipping the prescribed slot order is the most common cause of a failed boot.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.