Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM MR38400-618K8 128GB 8x16GB DDR5 4800MHz CL40 1.1V ECC Registered RDIMM memory upgrade

SKU CH-0QJX-QX4R9

Eight 16 GB DDR5 modules deliver 128 GB of registered ECC memory at 4800 MHz for the Supermicro H13SSF motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Pokaż jeszcze 30 konfiguracji
  • 128 GB kit runs at full 4800 MT/s because every module matches the controller's exact rank, voltage and CL40 timing
  • Eight 16 GB Registered ECC RDIMMs populate all Supermicro H13SSF slots without down-clocking or capacity limits
  • Registered architecture offloads the memory controller so every slot stays stable at full population under sustained load
  • On-die ECC corrects single-bit errors in real time preventing silent data corruption and unexpected reboots
  • 1 V DDR5 operation lowers power draw per module while maintaining enterprise-grade signal integrity

Exact-match server upgrade

This 128GB kit contains eight 16GB DDR5 RDIMM modules rated at 4800MHz with CL40 latency and 1.1V operation. Registered ECC architecture ensures data integrity and full-capacity recognition across all populated slots. The 288-pin form factor matches the Supermicro H13SSF motherboard's memory controller requirements precisely.

Replaces mismatched or partial kits

Installing this validated kit removes the instability caused by mixing ranks, voltages, or unregistered DIMMs that the board cannot support. The jump is worth it when your current configuration fails to post at rated speed, reports corrected errors, or cannot reach the full 128GB capacity because of population-rule violations.

Sustained load behaviour

Registered buffering offloads the memory controller so every slot runs fully populated at the rated 4800MHz without down-clocking under continuous throughput. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during extended production workloads.

Najważniejsze cechy

  • 128 GB kit runs at full 4800 MT/s because every module matches the controller's exact rank, voltage and CL40 timing
  • Eight 16 GB Registered ECC RDIMMs populate all Supermicro H13SSF slots without down-clocking or capacity limits
  • Registered architecture offloads the memory controller so every slot stays stable at full population under sustained load
  • On-die ECC corrects single-bit errors in real time preventing silent data corruption and unexpected reboots
  • 1 V DDR5 operation lowers power draw per module while maintaining enterprise-grade signal integrity

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does this 288-pin DDR5 RDIMM kit fit the Supermicro H13SSF motherboard?

Yes, the kit is verified for the Supermicro H13SSF and uses the 288-pin Registered RDIMM form factor that board requires, not UDIMM or SODIMM.

What population order should I follow when installing all eight 16 GB modules?

Consult the Supermicro H13SSF manual for the approved DIMM population sequence; installing in the wrong slots can prevent the system from recognising the full 128 GB capacity.

Will these registered ECC modules need any firmware updates or battery replacements over time?

No firmware updates or battery maintenance are required for the memory modules themselves; they operate at 1.1 V with on-die ECC for the life of the server.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.